> On the Chirp UV-5R Plus programing, on the channel tab there is a column
> for FM/NFN, is that the setting for Wife vs. Narrow band??
>
> If not how is the WB / NB programming done for the channels programmed?
>
> On the frequency tab there is a field for it per frequenvcy but that
> wont change the channels programmed......I think.
It's explained here:
http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns#Modewhich says:
> Mode
> This controls the transmit and receive mode of the channel. The following lists the common values and their meanings:
>
> FM: "Wide" FM for two-way communications
(i.e. 5 kHz deviation)
> NFM: "Narrow" FM for two-way communications (i.e. 2.5 kHz deviation)
> WFM: "Wide" FM for broadcast communications (i.e. ~100 kHz deviation)
> AM: "Narrow" AM for two-way communications (i.e. aircraft band in the US)
> DV: Icom's digital D-STAR mode
--Dan