Yes, I should have said Icom D-Star.... I have an ID -5100 in the vehicle too, but not much D-Star here in central OK. Building a MMDVM repeater based on a Mastr III, makes a great digital box. Since it has the data ports on it for EDACS use. First I will turn on DMR then D-Star.
On Sat, May 25, 2019 at 1:29 PM John Kemker kemkerj3@gmail.com wrote:
Check out Icom's line of digital radios. They're supporting D-Star.
Only reason I bought the Yaesu is it was on sale and I figured I'd try it out. It's not a bad radio, just don't like the closed architecture.
On Sat, May 25, 2019 at 8:42 AM Chuck Hast kp4djt@gmail.com wrote:
All of the above just goes to confirm why I will NOT buy Yaesu. They sold boat load of C4FM repeaters most of which are doing analog because they are not connected to the net. Yes you can use a MMDVM and build your own, but go buy a non-yeasu radio that supports their closed protocol.
I purchased a D-Star handheld from HRO in Portland back in 2008, it was years before I got to use it on D-Star and it is an open protocol but no manufacturer wanted to support it. Even now only Kenwood is producing radios that do D-Star.
I have had to deal with RT-Systems and I did not care for their "our way or the highway " attitude.
In amateur radio we are SUPPOSED to open things up change them use other bits and pieces on them, those who demand a walled garden should not get our money. Yaesu is outstanding in that way. Indeed I have always associated them with box operators, not nitty gritty hams who want to dig into the technical side of things.
On Fri, May 24, 2019 at 10:03 PM Sid Hayn sidhayn@gmail.com wrote:
I would wager that my driver sends the same everything as well. Honestly never checked, never bought the RT systems software.
The cable voltage issue is a wild guess, which at least made more sense to me than anything else.
On Fri, May 24, 2019, 22:54 Dan Clemmensen danclemmensen@gmail.com wrote:
Since your CHIRP driver almost certainly send exactly the same that the Yaesu software would send, It's likely that you woold have seen the same reslult if you had been using the Yaesu software. This is speculation on my part. A spike on a USB-to-serial cable is not very likely unless you somehow had a ground loop?
On Fri, May 24, 2019 at 7:39 PM Sid Hayn sidhayn@gmail.com wrote:
I helped write the Yaesu VX-3R driver
https://chirp.danplanet.com/projects/chirp/repository/entry/chirp/drivers/vx...
About a year after that, (and using the radio a good bit) the radio appeared to lose power while I was writing to it. The battery was tested and charged, still no love. I sent it to Yaesu and the replaced some minor part (*not* the flash) but sadly I don't have the documentation on what anymore. After they sent it back to me I didn't use it as much (I had more radios by this point). About a year ago I started using it more heavily and 6 months ago the same thing happened (with the writing and the dying).
In no way do I "blame chirp". In fact, I'd more likely blame a problem with the cheap cable possibly having voltage spikes and the radio not being designed to handle a small voltage spike over the serial and shorting something out. That said, twice my vx-3r has died while writing to it from chirp.
Thanks, Rick
PS> I don't sell anything, I don't work on radios for a living, and I love chirp. I don't believe there is any possible way someone could suggest I'm biased aside from unlucky personal experience.
On Wed, May 22, 2019 at 12:22 AM JOCK SOUTAR via chirp_users chirp_users@intrepid.danplanet.com wrote:
Never bricked any of mine. Could it be the operator rather than the radio?
On Tuesday, May 21, 2019 Dennis Wage <
chirp_users@intrepid.danplanet.com> wrote:
Chirp has bricked Yeasu radios?
I know what I think. What's the real truth?
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih@aol.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com_______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Farina at sidhayn@gmail.com To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan Clemmensen at danclemmensen@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rick Farina at sidhayn@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- Chirp + Editcp + MD380Tools on Linux Celestial!!! Chuck -- KP4DJT _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to W5NNH at kemkerj3@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- --John E Kemker III _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com