Kevin,
There is a setting the the radio that is out-of-range which is confusing CHIRP and causing the settings tabs to not appear. The issue recently is that the TXP setting in one or both VFO is out-of-range. If this is the case for you, a quick and dirty fix is to switch the radio to VFO mode and temporarily set menu 2 (TXP) to MID in both VFOs. Then download from your radio to see if the "Settings" tab appears. If not, you can email your CHIRP Radio Images (*.img) file to me and I can correct the invalid setting(s) and return the "repaired" image to you.
Jim KC9HI
On Sun, Dec 20, 2020 at 4:34 PM Kevin Evans kevians2001@gmail.com wrote:
I tried the steps in the previously closed solution of downloading the file and using the Settings tab, then change the setting for VFO. However, I don't have anything under the "settings" tab. I do find VFOA and VFOB under the "browse"r tab on the left, which is under the blank "Settings" tab, but I don't have any info on what to put in Hex, Dec, Bin cells or which ones to use or not use. Any assistance would be appreciated
Kevin _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jim at rock.unroe@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com