Try WFM instead of narrow. Do not program in a tone until you are able to receive without a tone setting. I don't believe that the UV-5RA supports the 223-225 MHz band (the BTECH UV-5X3 does).
Bob, N7XY
On 2/5/17 5:26 PM, donieallen1971@yahoo.com via chirp_users wrote:
I appreciate the advice from evetyone. I have tried making the programming changes to my UV-5RA. Unfortunately for me, I still have not been able to pick up anything.
First, I setup channel 1 with the following settings for my local First Responders.
Freq = 453.575000 tel:453.575000
Tone Mode = Total
Tone = 233.6
Mode = NFM
Second, I tried to setup channel 2 to our local repeater freq., which is 224.8000 with a "-" setting. But I receive the following error message:
Error settingmemory: Frequency 224.800000 tel:224.800000 is out of supported range.
Tx Freq 223.200000 tel:223.200000 is out of supported range
As I have stated, I am new to programming scanners and I'm not sure what to do from here.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bob Nielsen at n7xy@n7xy.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com