On Mon, May 27, 2013 at 7:17 PM, nv7v nv7v nv7v@burgoyne.com wrote:
With the UV-5R you can enter frequency limits with CHIRP so the user can't enter anything outside those limits manually in VFO mode. You can still program in frequencies outside those limits with CHIRP and upload them to the radio.
This is very useful as you can set the radio up for a Ham that may also have need to use the radio on other services for which they are authorized without worrying he may inadvertently transmit or enter and transmit on a frequency he should not.
If I enter in frequency limits in the "settings" section in CHIRP for the UV-B5, however, it then will not allow any frequencies outside those frequency limits to be programmed into memories using CHIRP or manually in VFO mode.
Is this a limit of the radio or is it possible CHIRP could be changed to work like it does with the UV-5R?
Thanks so much for your excellent work!!
Steve NV7V
Hi Steve,
You are correct. This is a very useful feature on the UV-5R.
I haven't determined if this is possible on the UV-B5 yet. The OEM software does have 6 different frequency range settings. Whenever I change to a different range setting, it erases all of the channels and CHIRP no longer wants to work with my radio (the ident changes or something). I haven't had time to dig into it any further.
Jim KC9HI