Yes power on message is set to message but still comes up as welcome.
Thanks for the response on receive only info.
On Wed, Nov 16, 2016 at 6:25 PM, Bunky <bunky1267@gmail.com> wrote:
> I picked up a Baofeng UV-6R I finally got it programmed, only problems I had
> was the error message sayng 0.0000 was out of limits for my receive only
> frequencies.
> but got by that.
>
> Now I would like to change my Welcome message but I can't get it to change.
> settings are set in my files but when I got to load the radio it goes back
> to the default.
>
> Anyone have a fix for this ?
Bunky,
To program a receive only channel set Duplex to "off".
The "Welcome message" works fine for me. Do you have the Power-On
Message setting set to Message?
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to bunky1267@gmail.com at bunky1267@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com