See this for an externally powered version which may come in handy should the host serial interface decide to be a REAL pill about how much current it's gonna source. :P http://mw0gkx.co.uk/radprog/icomhw/opc478.htm
On Mon, Nov 2, 2015 at 10:57 AM, Tom Morris blueneon@gmail.com wrote:
The MAX232 method is likely gonna be picky as heck unless there's a constant power source available. You can use the DTR line on the serial port but on some systems this isn't driven with enough current.
That being said, this is what I've used.
I just tossed a 2N2222 and 2N3904 in there as the PNP and NPN transistors. Never fails.
http://www.kc8unj.com/opc478.gif
On Mon, Nov 2, 2015 at 8:53 AM, Steve Whitehead nv7vham@gmail.com wrote:
Turns out it looks like most of the CP2102 USB adapters are 3.3V output. Specifications for TTL logic is 5V. I have ordered a CP2102 that has both so we'll try that and see what happens.
In the dim times (when we used a kerosene lamp to illuminate our computer screens) a common practice was to use a Max232 to convert RS232 levels to TTL for programming radios when you did not want to purchase a $40 cable from RT systems. It was often hit and miss if the radio would work because the levels were sometimes not quite right.....
Should have the different CP2102 this week and report back.
Thanks for the response Jim. I wish it as easy as finding a short. I have three of the converted 6-in-1 cables and the behavior is the
same.
I will keep playing with it. I did not order the cheapest available
CP2102
available from China and notice there are several different styles. Perhaps this one is somehow different in levels or buffering from the others. I have read online others have had success programming the FT-60 with the CP2102 so something is different. One thing of note is this is one of the CP2102s that John said has the TXD and RXD switched.
On Fri, Oct 30, 2015 at 8:25 AM, Steve Whitehead nv7vham@gmail.com
wrote:
I have been using one of the 6-in-1 programming cables with the
counterfeit
Prolific chip in it. After reading John Miklor's article about using
the
CP2102 in place of the Prolific counterfeit I replace the chip with the CP2102
.
The cable works perfectly with the UV-5R radios but no longer works with
the
Yaesu FT-60. It is the same with my MacBook Pro or if I use FT-60 commander. I thought before I start spending several hours chasing this down I
would
ask if anyone else has run into this.
Thanks,
-- Please note new e-mail address
nv7vham@gmail.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Tom Morris, KG4CYX Exhibit Technician and Plastic Orange Tree Arborist, Miami Children's Museum 786-228-7087 151.820 Megacycles