Rick, That’s a common error message. The possible causes can be found at http://www.miklor.com/COM/UV_ErrorMess.php Hope this helps…
John - http://www.miklor.com
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of slynchmob@aol.com Sent: Monday, September 21, 2015 7:37 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] COM 5
Name is Steve an glad it help
-----Original Message----- From: Michael Brazier mikeb1951@optusnet.com.au To: 'Discussion of CHIRP' chirp_users@intrepid.danplanet.com Sent: Sun, Sep 20, 2015 8:55 pm Subject: Re: [chirp_users] COM 5
Hi (Sorry I couldn’t see a name on the email).
Thanks for your help Mate. It has solved that issue and Chirp cloned my radio without any problem (had to change from COM 5 to 4). Now I plug the UV-5RTP in and it goes to start to upload but then I get "An error has occurred - Radio did not respond. Something in my brain is telling me I should be doing something else to prepare the radio but since my stroke the brain doesn't always work that well. Any suggestions would be appreciated.
Kind regards,
Mick.
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com mailto:chirp_users-bounces@intrepid.danplanet.com? ] On Behalf Of slynchmob@aol.com Sent: Monday, September 21, 2015 12:32 AM To: chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] COM 5
You have to update driver for win 10 take a look http://www.miklor.com/COM/UV_Drivers.php good luck
-----Original Message----- From: Michael Brazier mikeb1951@optusnet.com.au To: chirp_users chirp_users@intrepid.danplanet.com Sent: Sun, Sep 20, 2015 8:57 am Subject: [chirp_users] COM 5
Hi All
I have had Chirp for quite a few years but don’t let that fool you, I know nothing about it. I purchased two Baofeng UV-5R+Plus radios a while ago and a friend used Chirp to clone his radio and then to set my two up. I have used it a few times as I have recommended the Baofeng radios to others and then I have used Chirp to clone mine and set theirs up. I am not sure what has happened but I have updated to a Toshiba laptop, I’ve just updated that to Windows 10, and I downloaded the latest Chirp today. It’s been a while since I last used Chirp and a friend has just purchased two Baofeng UV-5RTP radios and asked me to set them up. When I opened Chirp I opened my radio image file and connected the new radio. I get a COM 5 port error and that’s it. I tried hooking my radio up but get the same error. Not sure whether it’s relevant but I used the same original data cable as I did for my, and others, radios. Any help would be greatly appreciated.
Kind regards,
Mick.
_______________________________________________
chirp_users mailing
list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To
unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com