Yes it is on the list, when I did the initial read of the radio, it picks up as tyt th 9000 144, which is all right, but it did say it was a beta driver, so I wondered it that was why. I have played, and I have found that I can import with chirp, than use the tyt software to read the radio, disable tx on the channels from that software, than upload it from there. Only issue being if I do that, everytime I use chirp to add new channels, I need to go through that process, just was I'm hopes there would be a way through chirp, like one stop shopping. I think your suggestion is easier. Thanks for the input.

James Jalbert
KC1ECV

On Nov 12, 2015 9:54 PM, "Gary Runningbear" <runningbear2000@gmail.com> wrote:

Is your radio on chirp list of compatible equipment? I am thinking maybe it is not in which case you will just have to be careful not to use the microphone while monitoring a public service channel. In days of old when Michigan was on normal repeater operation for public service I had the frequencies, tones, offset and all that programmed for our central dispatch. the theory was that in a dire Emergency most of the rules go out the window and I have no hesitation of picking up the mic and talking direct to central dispatch. However in these days of all trunking systems for public service I don't have to worry about that but I still have fire and EMS services program in and I can talk on those channels in an emergency. As long as you are aware that you are on a public service channel you won't be grabbing the mic. shouldn't be a problem.

On Nov 12, 2015 9:37 PM, "James Jalbert" <kc1ecv@gmail.com> wrote:

Not sure what happens on the radio, what I have tried is to set the offset to off and those frequencies will not import to chirp, I see them when I import, but they are grayed out and con not be selected. I also tried to set off set to split, and the offset frequency to an out of range, as well as tried setting offset to + or - and the offset freq to something like 1000 and I get the same result, can not import the frequencies from the csv to chirp

James Jalbert
KC1ECV

On Nov 12, 2015 8:14 PM, "Eric Vought" <evought@pobox.com> wrote:

What happens with this particular radio if you set the transmit frequency to an out-of-range value? 0, -1, 0.1 Mhz, whatever, something that the radio will refuse to transmit on?

On Thu, Nov 12, 2015 at 6:39 PM, James Jalbert <kc1ecv@gmail.com> wrote:

No big, no miss leading, different radios treat things different

James Jalbert
KC1ECV

On Nov 12, 2015 7:30 PM, "Gary Runningbear" <runningbear2000@gmail.com> wrote:

To James KC1ECV,
  You were right my friend about turning duplex to off to kill the transmit. I guess that particular radio can't be affected by that so now I guess you'll have to set a switch in your own mind do not grab the mic while monitoring those PS channels. Sorry to have misled you but that was a learning point for me and it won't happen again. hi hi

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com