Ok, rats, and I thot I was doing so good... have no idea where the other firmware came from because I don't own any other radios and have never been in chirp before today, but nevertheless...
May I ask how you could tell about the BFB firmware?
I would like to confirm I understand what needs done here before I do it.
So now I need to actually upload an old build (7-14-2014) into chirp. Then I go to the KC9HI site and click on the F5R3407 BF-F8HP(150319N) (factory) img and that will load the factory image into chirp? (if I don't have the old build loaded this wont work?) and then I need to upload the factory file into radio 1 and then I have to reload the latest chirp build. Do I have that right?
Will the other images I currently have in chirp be deleted when I load the old version?
So grateful for your help...
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Saturday, September 12, 2015 6:06 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] An error has occurred. Image not supported by radio:
Debra,
Yes. The squelch settings were changed in radio #1.
All three radios have the same N5R340A firmware. You should be able to able to upload an image from any one of them to any one of the others.
The reason you can't (and it is a good thing you can't) is because someone has uploaded and image from a radio with BFB firmware into radio #1. It probably doesn't receive signal without pressing the [MONI] button. You definitely do not want to upload BAO1.img into radio #2 or radio #3.
You need to follow the procedure in the link below and upload either BAO2.img or BAO3.img (they are both identical) into radio #1.
http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R
Once radio #1 if fixed, be sure to upgrade back to the latest CHIRP daily build.
Jim KC9HI
On Sat, Sep 12, 2015 at 8:40 PM, dwilson dwilson223@cox.net wrote:
You know, I think on the first radio I might have changed the service
settings before I actually saved the first file...
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6086 / Virus Database: 4419/10627 - Release Date: 09/12/15