Again sorry about the delay replying. Have been deployed for disaster relief and just got back home. I did not realize that the csv file had to be created within chirp. I thought I could import any csv file. That may clear up the problem I was having.

Now I have another problem. I can no longer download from a Icom 91ad. Gives error: Unable to get radio model.
Have tried daily builds 05172011, 05202011 & 05252011 and get the same error each time. Can read a 2820 without any problems.
I can read the 91ad's with Icom's software without any problem.

Really need to be able to transfer the same file between different radios for our disaster relief comm's team.

Thanks for all your help

On Thu, May 12, 2011 at 2:02 PM, Dan Smith <dsmith@danplanet.com> wrote:
> When I open the csv file in chirp I only get the last channel in the csv
> file loaded to chirp.

Hmm.  One of us is confused.  The CSV file you provided was definitely
not created with CHIRP, and thus definitely won't be readable by it
either.  Did you mean to send something else?

Also, your debug.log is basically empty.  I need you to try your failing
import, quit chirp and immediately grab the debug.log file to send.
Every time you start chirp, it clears out that log.

Thanks!

--
Dan Smith
www.danplanet.com
KK7DS

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users



--
James E Brucke NE4AT
1066 County Road 49
Marbury, AL 36051
Home: 334-365-1866
Cell: 334-868-9291