Mine does misbehave after it's been on a while. Seems to be fairly normal.... not sure if it's a firmware thing or if the RDA5802 FM chip is just goofy :)
On Sat, Oct 5, 2013 at 8:34 PM, Milton Hywatt mhywattt@yahoo.com wrote:
Mine clips. And then if a channel becomes active besides the FM channel you are listening to, when the channels then stops being active the UV5x does a swoosh swoosh swoosh from the rx audio. You can get rid of that by pressing the FM button twice. Also you can stop the distortion by going off channel then back using the channel encoder knob or up/down buttons. This will clean the audio up but it will eventually return to being distorted. So you just repeat the process.
*From:* william coulson wcoulson730@gmail.com *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Sent:* Saturday, October 5, 2013 6:13 PM *Subject:* [chirp_users] FM Broadcast signal cliping or distortion
Hi Jim
Have you heard or have you personal experience of the Baofeng UV5XX clipping the FM signal or distorting in FM broadcast mode?
I still say your truly deserve an award for the "online" service you have and continue to provide to all of us.
Bill Coulson W 6 S Q
----- Original Message ----- *From:* Jim Unroe rock.unroe@gmail.com *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Sent:* Saturday, October 05, 2013 3:03 PM *Subject:* Re: [chirp_users] Strange Situation
On Sat, Oct 5, 2013 at 5:45 PM, Paul Robertson probertson6@cogeco.cawrote:
My error gentlemen. Should have shown the radio as TYT-TH3R which is in the drop down box of the program. As mentioned previously .. When I download from the radio to the computer all appears well as the radio connects to the computer, the light flashes on the radio when transferring data. However the contents of the radio do no show on the "grid" display. The display shows blank frequencies. There is a tab that shows on that screen something was downloaded but I seem to be unable to figure out where. I am obviously doing something wrong.
My suggestion now would be to provide us with a debug.log after the download. It might give some insight as to what is happening (or not happening).
http://chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users