Front jack is for programming, rear is for an external speaker. Be sure you have the correct cable.... You need the one from www.baofengtech.com

I had problems with mine. Spent two hours via email with tech support ensuring that everything was current and correct. They shipped me a new cable and all is well.

David Mosley, LP

Of all the roads you take in life,

make sure some are DIRT!!!!

Don't retreat, RELOAD!!!!

KG5FAC

On Thursday, January 11, 2018, 5:41:47 PM CST, sreeb <sreeb@beers.nu> wrote:

I can't help yet, but maybe you can help me. I'm still trying to get mine to communicate with chirp at all.

Are you plugged into the front or rear jack?

On 1/11/2018 3:07 PM, David Mosley via chirp_users wrote:

Hello All,

I have a new B-TECH UV-50x2 and I am using CHIRP to program it.

I would like to have the display set up as:

A: Name (2m band)

B: Frequency (for A)

C: Name (70cm band)

D: Frequency (for B)

Is it possible for A to scan 2m only and C to scan 70cm only, or, A&B to scan together and C&D to scan together? If so, what settings to I change in CHIRP to accomplish this?

Thanks so much for your help.

73's

David Mosley, LP

Of all the roads you take in life,

make sure some are DIRT!!!!

Don't retreat, RELOAD!!!!

KG5FAC
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ed Beers at sreeb@beers.nu
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

Virus-free. www.avast.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to David at mtnmedic61@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com