Well I'm stumped here. I thought Menu #55 would allow a 2.5 step.
And not having programmed these frequencies into my FT60 with with software I'm just
guessing. I'm sure someone will chime in and give you a yes or now
answer and how to do it.

Good luck.

From: Phil - w2lie <w2lie@w2lie.net>
To: chirp_users@intrepid.danplanet.com
Sent: Monday, November 25, 2013 9:10 PM
Subject: Re: [chirp_users] FT-60r not receiving "on frequency"

The radio is setup for "Narrow" using menu 55, so that wasn't the issue.
The other thing Notice is when I look at a channel that is off, I change the setting from Name to Freq, example again 477.3875 becomes 377.3800. But when I move down or up a single memory slot, then come back to 477.3875/477.3800 is then displays as 477.3825.
Step size is setup for "Auto" in the radio, but coded in CHIRP as 12.5

Even after reading back the radio in Narrow, I can't chose 2.5khz.

On 11/25/2013 8:24 PM, Milton Hywatt wrote:

Switch to NARROW mode and download your template. You
should have the ability for 2.5 steps. If the software doesn't support
it which I can think of no reason why, then you can manual program
the steps in. Remember with the FT60 you have to recreate the channel
structure in VFO mode then overwrite your channel to change.

The FT60 does support 2.5 steps when in narrow mode. How you match
that up with programming via Chirp I don't know because I've not done it
with software.

Milton.

From: Phil - w2lie <w2lie@w2lie.net>
To: chirp_users@intrepid.danplanet.com
Sent: Monday, November 25, 2013 8:14 PM
Subject: Re: [chirp_users] FT-60r not receiving "on frequency"

Thanks for the advice Milton, but 2.5 isn't supported on this radio.
Any other suggestions?

On 11/25/2013 8:08 PM, Milton Hywatt wrote:

Set the step resolution to 2.5 khz. That is if it is available.

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users