Hi Dan,
I may have mildly misspoke. I know it can be done manually but I think it would be very difficult, if not impossible to get CHIRP to do it. Sorry for any confusion.
Tom
------ Original Message ------ From: "Dan Jolley" danjolley@hotmail.com To: "chirp_users@intrepid.danplanet.com" chirp_users@intrepid.danplanet.com Sent: 5/17/2019 3:01:42 PM Subject: Re: [chirp_users] UV-82HP display question
Thanks Charles & Tom, I have tried so many combinations in Chirp and I've also watched some YouTube videos, none of them have shown that capability. I couldn't get it to do it in Chirp either.
It sure would be nice to have that feature! Anyway, if I knew someone that knew how to do that it would be ya'll!
Thanks again, Dan Jolley
From: Dan Jolley Sent: Friday, May 17, 2019 1:13 PM To:chirp_users@intrepid.danplanet.com Subject: UV-82HP display question
I have a UV-82HP, and I would like the top line to say the channel name, and on the bottom line I would like it to show the correct frequency of the channel I am on. Example: If I am on NOAA on the top line I would like it to show 162.525 on the bottom line. Which is the NOAA frequency in our area.
I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same thing to (if possible).
Is this possible? I have done so many google searches and read a bunch of articles. One man said he had his radio this way, but did not say how he did it.
I have been playing around with the Settings in Chirp and I have the Name on the top line, but can't get the correct frequency on the bottom line.
Thank you in advance, Dan Jolley