Hi,
have you tried transmitting on a channel that is supposed to have an offset? When I look at the menu setting #26 of the uv-82 I see the same value that you do, 00.000. However when I transmit on a channel of which I know I have put an offset using Chrip, I can see that the radio switches to the adjusted offset-frequency. In channel mode you can adjust (menu# 21 & 22) whether you want to the the channel name, channel# or frequency. When on frequency one can see the switch.
Cheers, Chris
On May 14, 2014, at 4:56 PM, Adam Brady adamtbrady@cassiausa.com wrote:
I reset the radio and uploaded it fresh. Then I entered the information into CHIRP and downloaded it. It still will not accept the fields.
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina Sent: Wednesday, May 14, 2014 10:03 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-82 Offset
Link correction... http://www.miklor.com/UV82
Sent via iPhone6
On May 14, 2014, at 9:04 AM, Adam Brady adamtbrady@cassiausa.com wrote:
Hello and thank you to all who have given their experience here. The issue I am having is that on my CHIRP I have the OFFSET at .600, and the DUPLEX either a + or -. However when I upload this to my radio it does not take the settings. My radio reads OFFSET 00.000 and DUPLEX “none”. I just finished uninstalling, and reinstalling, CHIRP. When I did my initial upload from the radio the settings in CHIRP show the correct OFFSET and DUPLEX in the radio. I tried to find this already reported, but did not.
Adam T. Brady Cassia Engineered Products Corp. 1013 North Parsons Ave. Brandon FL 33510 Online: CASSIAUSA.COM E-mail : adamtbrady@cassiausa.com Office (813) 643 9696 Cell (813) 967 3925
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users