On Thu, Feb 5, 2015 at 11:36 PM, Niall Parker stuff@pender.dnsalias.net wrote:
Hello,
I'm using CHIRP with a couple Baofeng UV-B5 radios and both give the same error when uploading:
RadioError: Radio NAK'd block at address 0x0f10
Clone failed: Radio NAK'd block at address 0x0f10 Clone thread ended --- Exception Dialog: Radio NAK'd block at address 0x0f10 --- None
The radios seem to program OK though, haven't noticed any functional issues.
Didn't see any bugs like this listed, nor any way to file a new one, is this the appropriate place ? Running chirp daily from the PPA for Ubuntu 12.04, any other info needed ?
... Niall
Except for a small batch about a year ago with 28 menus, UV-B5/B6 radios have always had 29 menus. Now it seems that there are a few radios (like yours) that are shipping with only 27 menus. In additional to the 2 menus that have been removed, the radios with 27 menus do not support the "test mode settings". The test mode settings start at 0x0f10, so once the transfer gets to this point, the radio decides that is received all it needs and stop acknowledging the remainder of the transfer.
Another than this error near the end of the transfer (at the start of the test mode settings), the channels and setting are uploaded normally.
Jim KC9HI