Good Morning,
Thanks for the info. I didn't look to see if other DMR radios were included or supported. Not a problem. I have the radio setup and I have a couple of codeplugs for the radio. I just liked the way that chirp works ;-)
TNX Will WC2L
On 12/25/2018 11:33 PM, Larry Howell wrote:
Will,
Chirp can only program analog radios. The CS800D is DMR so you need a code plug, which is a fairly complex configuration file. I'd suggest searching online for "cs800d ciodeplug" to locate one and learn more about DMR. I found one for my AT-868UV HT here and one for the CS800D code plug can be found at http://arrl-ohio.org/digital/kb8lkh.html and other sites.
Larry AC8YE
On Tue, Dec 25, 2018 at 10:23 PM William Liporace <wc2l@wc2l.com mailto:wc2l@wc2l.com> wrote:
Hi Folks, I have not looked too much online, but it does not appear that anyone has setup the Chirp to work with the Connect System radios. I happen to have picked up the CS800D. Please correct me if I am wrong... TNX Will WC2L -- William Liporace WC2L http://www.wc2l.com orhttp://dxc.wc2l.com AR-Cluster Node telnetdxc.wc2l.com <http://dxc.wc2l.com> or 144.93 MHz wc2l@wc2l.com <mailto:wc2l@wc2l.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to larry.howell.47@gmail.com <mailto:larry.howell.47@gmail.com> at larry.howell.47@gmail.com <mailto:larry.howell.47@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to wc2l@wc2l.com at wc2l@wc2l.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com