Just got a JB UV 55 radio, it's basically the "car" version of the UV 5 R, seems to even have the same channel / memory structure. Does anyone out there have any Experiance on how to program it through Chirp?

Users,

So, it turns out, every cable has a needs an unique driver. The cable I have can be seen here - http://www.amazon.com/Programming-Cable-Baofeng-UV-5R-Driver/dp/B008RZJHJU/ref=sr_1_1?ie=UTF8&qid=1381801314&sr=8-1&keywords=uv-5r+cable

If that is the case, one needs a driver from - http://changux.co/osx-installer-to-pl2303-serial-usb-on-osx-lio/

Thanks!

Jim

On Monday, October 14, 2013 9:28 PM, Dan Smith <dsmith@danplanet.com> wrote:

> I'm attempting to "Download from radio", I try the four port selections.

Sounds like you don't have a driver loaded for the cable that gives you
a serial device. Usually /dev/cu.*.

Check this page for details:

http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips

--
Dan Smith
www.danplanet.com
KK7DS

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users