Coping and then pasting is a much safer way to get information on to a Baofeng.  

If you just upload file from another radio you stand a good chance of “semi bricking" the the uploaded radio.  (I say “semi bricking”, because you can get the radio back working, but it has taken me a few hours with each radio.)

(I have programed over 120 radios for club members, and other, and have never had a problem by coping and then pasting.
Peter
-----
Peter J. McClosky, N7IY
Eugene, Oregon
pmcclosky@earthlink.net
n7iy@arrl.net
http://home.earthlink.net/~pmcclosky/

On Aug 10, 2016, at 1:05 PM, Jim Unroe <rock.unroe@gmail.com> wrote:

On Wed, Aug 10, 2016 at 1:56 PM, awake <awake@0324am.net> wrote:
You can have multiple radios connected at the same time, they'll be just in
separate tabs. I'd suggest to load each radio in a separate tab and then
copy and paste the relevant data between them. Direct export won't work
because you're most likely trying to transfer also some model-specific
settings.

Cheers,
rad0


Copy and paste between tabs is certainly works and is convenient, but
importing the *.img radio into a tab for the destination radio is more
thorough.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Peter at pmcclosky@earthlink.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com