Hi Alex,
On Wed, Feb 14, 2024 at 10:41 AM A Boer aboertus@gmail.com wrote:
Good day, CHIRP Users! I am having some trouble using CHIRP with some new radios I am trying to program. Simply put, I cannot get the repeater channels to work. I downloaded the .img file from one radio into CHIRP, copied and pasted the repeater configuration from the CHIRP list of repeaters and pasted it into my .img file, then uploaded the .img file into both radios. The radios will not talk to each other through the repeater. I have gory details with screenshots and radio display pictures in the attached .jpg files. If anyone has the time to review those details and has some ideas on how to fix this problem, I would certainly appreciate the feedback. Thank you for your time.
Alex Boerner KJ7CPZ
These radios don't use SFT-D or OFFSET in programmed channels. It is for this reason that these menus are always set to OFF when the radio is in MR (channel) mode. See my detailed menu reference for the BF-F8HP available from the miklor.com radio information website.
https://www.miklor.com/COM/UV_MenuDef.php
What these radios use is the RX frequency along with the direct TX frequency. CHIRP allows you to program it as Duplex = + and Offset = 5.000000, but then it calculates the actual TX frequency and stores that instead and sends it to the radio because that is what the radio uses. If you tap the [*] to put the radio into "reverse mode" the display should change from 444.875 to 449.875 if it is programmed correctly. Tap the [*] a second time to exit "reverse mode".
Assuming that the 100.0 Hz CTCSS tone is correct for this repeater, then something else other than programming is the issue.
Jim KC9HI