27 Sep
2018
27 Sep
'18
10:20 a.m.
We keep getting this issue.
The 450D implements a full serial/RS-232 level port. Make sure you cable supports RTS/CTS handshaking. You should have 5 wires on the cable, Pin 2 DATA OUT to computer, Pin 3 DATA IN from computer, Pin 5 GROUND, Pin 7 RTS, Pin 8 CTS.
On 27 September 2018 at 12:50 Bruce Ashdown radiog4kzt@gmail.com wrote:
I have just downloaded latest Chirp (CHIRP daily-20180906). Using Windows 10, Com port 3, Vendor Yaesu, Model FT-450D. My CAT cable works fine with "PCC for FT-450D", WSJT-X , "Ham Radio Deluxe" & "FREE450", but not "Chirp"! Followed instructions to download from radio & got message:- An error has occurred - Failed to communicate with radio: Unable to read block 0 expected 6 got 4. Any ideas? My FT-450D has the UK 60m frequencies plumbed into the memories - will these be saved in Chirp? I want to update the radio's firmware, so want to backup the memories including the 60m ones. Thanks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net