No, John. I just downloaded what was on the radio when I bought it. There are many columns that ask for information that is not available from the various repeaters and don’t seem to have a bearing on the use. Things like “cross mode” and “tone sql” and “DTCS code” and DTCS Rx code” and etc. Didn’t realize I could make a different template, but what if I were to leave off something important? How is one to know?
Whit On Jul 21, 2014, at 4:54 PM, John LaMartina JohnLa@usa.net wrote:
Whit, I'm curious. Did you create an initial template?
CHIRP supports over 60 different model transceivers. You must First create a template by performing a Download from Radio so CHIRP know the model and parameters of your radio. Make your changes and updates to the template, then perform an Upload to Radio.
Hope this helps . . .
John K3NXU http://www.miklor.com
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Dr. Whit Woodard Sent: Monday, July 21, 2014 7:26 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Another question
I saved my template after uploading it to the radio and I need to make some changes, but I can't seem to access the template when I open it. Is it not possible to amend the settings from the saved copy and then upload it to the radio??
Thanks, Whit k3wb
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users