Bruce.
Whatever you do, and I'm sure you've seen this on the CHIRP website as well as discussed in this forum, make sure you spend a little extra and get a cable from a reputable source that has an FTDI chipset. You will be much happier and not suffer from the Chinese knock off problem with the other chipsets.
73 and enjoy!
Mike/KD6FTR - about.me/kd6ftr
On Mon, Apr 24, 2017 at 6:54 PM, Bruce LeGrande kb6lwn@gmail.com wrote:
Finally got the Ubuntu mini.iso to d/l without error, got a FULL INSTALL of Ubuntu v16.04 on a USB Thumb, got Dans ppa set in the repository, and got 'chirp-daily' to d/l and install..... (thanks to the wifi at Buddha Thai Kitchen in Middletown - best Thai food in the area)
Yippee !!!!!
Looks like my radios shall finally get programmed... Checked the BTech UV-5X3, the UV-82HP, and have spent the remainder of the afternoon researching freqs and programming the Leixen VV-898S...
Need to order the cable for the VX-8DR (Yaesu), and the UV-50x3 (BTech) in the truck, but I see those in the list in Chirp, so I'm very hopeful at this point...
Perhaps it's time for good things to start happening here... FINALLY !!!
Thanks for putting up with my rants over the last year+... Thanks to all that offered input. And those that silently prayed.
73 - Bruce
Sent from BlueMail http://www.bluemail.me/r
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Mike/KD6FTR at mike@mcrhome.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com