On Sun, Oct 24, 2021 at 8:49 PM Rebecca Copeland
<rcopeland@mandeljcc.org> wrote:
>
> Ok, so what do I do now?

Unless you can get the OEM software to work, it is a cable/connection
problem. No programming software can work unless there is a complete
and working connection between the radio and computer. Make sure that
nothing is getting in the way of the plug getting fully inserted into
the socket. Sometimes the socket cover can get in the way. Sometimes
the shape of the radio's case can get in the way. Sometimes the socket
of these cheap radios is positioned too far inside the case so the
pins of the programming cable can't fully reach inside the socket to
make proper connections. Sometimes it is possible to work around these
issues by pressing on the plug as the cloning progresses.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at amnon.zohar@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com