Yes dual watch still works, but this bug/coding causes TX problems. Person one has radio set to the following A 154.6 Mhz B 446 Mhz TDR is on A is active
Person two has radio set to A 146.52 B 446 TDR is on B is active
Person 2 uses slot B to call 1. Person 1 hears 2 on slot B. ok Person 1 responds to call but radio switches to slot A (its starting position) Person 2 can not hear person 1 because of freq differences.
If someone can clarify my writing then please do
On Mon, Sep 7, 2015 at 9:11 AM, Jim Unroe rock.unroe@gmail.com wrote:
On Mon, Sep 7, 2015 at 7:21 AM, Galen Thurber galenthurber@gmail.com wrote:
oh shucks, pretty much makes a 2 channel radio one. Will have to set
radio's
A/B to the same channel in case radio RXs on the other A/B
Now why would you do that? Dual watch still works. It is dual watch priority is what is no longer useful. And instead of setting both displays to the same frequency/channel, just disable dual watch with menu 7 (TDR). That way only the selected display (A or B) will receive.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com