24 Aug
2020
24 Aug
'20
5:57 p.m.
Opened Device Manager, Ports (COM & LPT) "USB-SERIAL CH340(COM3)" I've always used COM 3 and it worked fine until last Wednesday.
On August 24, 2020 at 5:48 PM Glenn K0LNY glennervin@cableone.net wrote:
Chuck, Have you tried the following? open device manager, and seeing which com ports show, and then unplug the cable, and see which one disappears, so you can select that port in Chirp. HTH. Glenn ----- Original Message ----- From: Charles Gierke mailto:cgierke@cox.net To: Discussion of CHIRP mailto:chirp_users@intrepid.danplanet.com ; Silverfox mailto:alan.r.hill@gmail.com ; John LaMartina mailto:JohnLa@usa.net Sent: Monday, August 24, 2020 7:43 PM Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating thanks for the suggestion. Unfortunately, no luck. Chuck > > On August 23, 2020 at 4:26 PM Silverfox < alan.r.hill@gmail.com mailto:alan.r.hill@gmail.com > wrote:I forgot that you are on Windows. The windows OS is very poor supporting USB. You might try going into the device manager and tell it to show hidden devices. Once that is done, look at the USB entries and delete all of them that are diminished icons. That is, they are lighter than the other icons. Good luck. Alan From: chirp_users-bounces@intrepid.danplanet.com mailto:chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Charles Gierke Sent: Sunday, August 23, 2020 3:05 PM To: Discussion of CHIRP; John LaMartina Subject: Re: [chirp_users] Chirp and BaoFeng UV 5R not communicating hi, still no luck. I went to the web site and put a death-grip on the plug and held it in as far as it would go. I trimmed a hair of the edges of the plug to let it seat on the bottom. thanks for the suggestions <!--[endif]--> On August 22, 2020 at 5:55 PM John LaMartina <JohnLa@usa.net> wrote: This may assist. Www.Miklor.com/COM/UV_ErrorMess.php John Www.Miklor.com/UV5R <!--[endif]--> On Aug 22, 2020, at 6:45 PM, Charles Gierke <cgierke@cox.net> wrote: > > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. On Friday all I got was the following message: Radio Did Not Respond. I tried reloading the latest version of CHIRP, no change. I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change. Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP. Any suggestions? Thanks Chuck KJ7INT _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John LaMartina at johnla@usa.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com > >_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck at cgierke@cox.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com >> > _______________________________________________chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck at cgierke@cox.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com >--------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck at cgierke@cox.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com