Answers below....
On Κυρ, 2015-04-05 at 12:47 -0700, Dan Smith wrote:
Here is the output of chirp with Icom/Auto-Detect
Server reports version 0.4.1 is available Unexpected response from radio 70 -> e0 (7): 000: fe fe 70 e0 19 00 fd 00 ..p.....
Read 0 bytes total
This means it's not getting anything from the radio at all. Are you using the speaker or data jack cable?
I am using a home made cable found here:
http://mw0gkx.co.uk/radprog/icomhw/opc1529r.htm
Is the D-STAR module installed?
Yes it is
Are you tuned to a D-STAR channel at the time you're attempting to program it?
Yes I am.
But what I have just found is this page:
http://www.dj0abr.de/english/technik/aprs/aprs_mit_dem_ic.htm
And if you scroll to the middle you will read that 2820 needs -8V to input pin, but my usb-to-serial adapter, outputs only -6,2V.
Maybe this is the problem!!!
73 Apostolos