I have had absolutely no trouble with Windows 10 and Chirp. Works great!
Stuart Rauh Stuart@Rauhnet.com
On Mon, May 22, 2017 at 9:20 PM, roland kelts via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
people seem to have all kinds of problems with windows 10 maybe the whole system for that o.s. needs to be rewritten i couldn't get chirp to work at all wouldn't even load . Solution i found and old abandoned computer (dell) with an earlier os and now everything works!!!
On Sun, 5/21/17, chirp_users-request@intrepid.danplanet.com wrote:
Subject: chirp_users Digest, Vol 101, Issue 20 To: chirp_users@intrepid.danplanet.com Date: Sunday, May 21, 2017, 12:00 PM
Send chirp_users mailing list submissions to chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."
Today's Topics:
1. Re: Cannot read BaofengBF-888S (Jim Unroe) 2. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 3. Re: Cannot read Baofeng BF-888S (Rich Baker) 4. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Jardy Dawson) 5. Re: Cannot read Baofeng BF-888S (Jardy Dawson) 6. Re: Cannot read Baofeng BF-888S (Jim McCorison) 7. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 8. Re: Cannot read Baofeng BF-888S (Rich Baker) 9. Re: Cannot read Baofeng BF-888S (Jim McCorison) 10. FT2D (NNN Wx) 11. Re: chirp_users Digest, Vol 101, Issue 19 (Bob Decker) 12. Re: chirp_users Digest, Vol 101, Issue 19 (Carrie Jackson) 13. Re: Cannot read Baofeng BF-888S (Joe Puma) 14. Re: Cannot read Baofeng BF-888S (Joe Puma)
Message: 1 Date: Sat, 20 May 2017 15:36:37 -0400 From: Jim Unroe rock.unroe@gmail.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID:
CADnO8U4_wsaCLet=nu=0a90pNzdt=DQc+i7v0b_A_xXK9CTowA@mail.gmail.com Content-Type: text/plain; charset="utf-8"
On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt hgerhardt@wavecable.com wrote:
I have been fighting similar
problems on Win10 on my Baofeng UV-5R+. I too
rolled back the driver to 3.2.0.0
to get my "genuine" cable that I purchase
from HRO to work once I upgraded
to Win10. It worked fine on Win7 and never
had a problem with the latest
driver but would not work on Win10 till I
rolled the driver back. I
then turned off the auto driver updates for this
device. Everything worked
fine after rolling the driver back.
A few months later when I tried to
read the radio again, it would not
connect. I checked the
driver and it was still the 3.2.0.0 driver in my
listing. It took me several
days till I updated the driver to the latest
driver which of course did not
work, but when I rolled it back again the
3.2.0.0 driver from the pick list
for this device, it began to work again.
Don't ask me what is going on but
then set it back for auto updates. I will
now just roll the driver back
every time I want to use this cable.
I suggest you try to update your
driver and then roll it back again to
3.2.0.0 to see if that works for
you. I know it sounds stupid but it is
worth a try since it worked for
me.
Herb, KB7UVC NW APRS Group, West Sound
Coordinator
Our WEB Site: http://blog.nwaprs.info/
There is no need to disable updates. If Windows does update your Prolific driver, the previous driver is still installed. All you have to do is go into Device Manager and re-select the driver version that you want to use. I keep several Prolific driver versions installed and switch between then at will for testing purposes.
Jim KC9HI
-------------- next part
A non-text attachment was scrubbed... Name: ProlificDrivers2.jpg Type: image/jpeg Size: 161541 bytes Desc: not available Url : http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/40ab39a9/attachment-0001.jpg
Message: 2 Date: Sat, 20 May 2017 17:58:49 -0400 From: Rich Baker rbakedq@gmail.com Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: CAELWbPHggmTKrpxz-nTzfz-m2RxrEts0WSatBGaV3zZMA6V1ng@mail.gmail.com Content-Type: text/plain; charset="utf-8"
Unsubscribe me from this list NOW.
On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant stevesgt@effable.com wrote:
Just to ping the group again:
Has anybody out there had recent
luck programming the Leixen VV-898E
using a recent build of Chirp on
MacOS?
On 5/2/17 0:08 AM, Steve Sergeant
wrote:
I just installed
chirp-daily-20170501.app to try. I am attempting to
copy setups from one Leixen
VV-898E radio into several others.
However, a fraction of a
second after the screen fills with the data
from the radio, Chirp
unexpectedly quits, and I'm given the opportunity
to send a report to Apple.
My system is:
Macbook Air 11"
(MacBookAir6,1)
MacOS X 10.11.6 (15G1421) 4GB RAM
The last line in
.chirp/debug.log reads:
/Users/username/Applications/chirp-daily-20170501.app/
Contents/MacOS/../Resources/chirp/chirpw:143:
PangoWarning: Invalid UTF-8
string passed to pango_layout_set_text()
gtk.main()
I'm using the
osx-pl2303-installer.pkg for my serial driver. This is
currently the only radio for
which I have a programming cable.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at
rbakedq@gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe@
intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq@gmail.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/00d7f0f7/attachment-0001.html
Message: 3 Date: Sat, 20 May 2017 17:59:05 -0400 From: Rich Baker rbakedq@gmail.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: CAELWbPEYTesu5jWmSHgqmF70N6MrjqCZfYx0GmpYybU4fz4iQQ@mail.gmail.com Content-Type: text/plain; charset="utf-8"
Unsubscribe me from this list NOW.
On Sat, May 20, 2017 at 3:36 PM, Jim Unroe rock.unroe@gmail.com wrote:
On Sat, May 20, 2017 at 11:08 AM,
Herb Gerhardt hgerhardt@wavecable.com
wrote:
I have been fighting similar
problems on Win10 on my Baofeng UV-5R+. I
too
rolled back the driver to
3.2.0.0 to get my "genuine" cable that I
purchase
from HRO to work once I
upgraded to Win10. It worked fine on Win7 and
never
had a problem with the latest
driver but would not work on Win10 till I
rolled the driver back.
I then turned off the auto driver updates for
this
device. Everything
worked fine after rolling the driver back.
A few months later when I
tried to read the radio again, it would not
connect. I checked the
driver and it was still the 3.2.0.0 driver in my
listing. It took me
several days till I updated the driver to the latest
driver which of course did
not work, but when I rolled it back again the
3.2.0.0 driver from the pick
list for this device, it began to work
again.
Don't ask me what is going on
but then set it back for auto updates. I
will
now just roll the driver back
every time I want to use this cable.
I suggest you try to update
your driver and then roll it back again to
3.2.0.0 to see if that works
for you. I know it sounds stupid but it is
worth a try since it worked
for me.
Herb, KB7UVC NW APRS Group, West Sound
Coordinator
Our WEB Site: http://blog.nwaprs.info/
There is no need to disable
updates. If Windows does update your
Prolific driver, the previous
driver is still installed. All you have
to do is go into Device Manager
and re-select the driver version that
you want to use. I keep several
Prolific driver versions installed and
switch between then at will for
testing purposes.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at
rbakedq@gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe@
intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq@gmail.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/3ef22303/attachment-0001.html
Message: 4 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jardy Dawson jardy72@yahoo.com Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was:
...daily-20170501 repeatable crash) To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: E64697DE-5BA1-4595-AC56-99B0663E9B06@yahoo.com Content-Type: text/plain; charset="us-ascii"
You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH EMAIL.
Jardy Dawson WA7JRD Ham Radio
Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that!
On May 20, 2017, at 14:58, Rich Baker rbakedq@gmail.com wrote:
Unsubscribe me from this list NOW.
On Sat, May 20, 2017 at 1:59 PM,
Steve Sergeant stevesgt@effable.com wrote:
Just to ping the group again:
Has anybody out there had recent
luck programming the Leixen VV-898E
using a recent build of Chirp on
MacOS?
On 5/2/17 0:08 AM, Steve Sergeant
wrote:
I just installed
chirp-daily-20170501.app to try. I am attempting to
copy setups from one Leixen
VV-898E radio into several others.
However, a fraction of a
second after the screen fills with the data
from the radio, Chirp
unexpectedly quits, and I'm given the opportunity
to send a report to Apple.
My system is:
Macbook Air 11"
(MacBookAir6,1)
MacOS X 10.11.6 (15G1421) 4GB RAM
The last line in
.chirp/debug.log reads:
/Users/username/Applications/chirp-daily-20170501.app/ Contents/MacOS/../Resources/chirp/chirpw:143:
PangoWarning: Invalid UTF-8
string passed to pango_layout_set_text()
gtk.main()
I'm using the
osx-pl2303-installer.pkg for my serial driver. This is
currently the only radio for
which I have a programming cable.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at
rbakedq@gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq@gmail.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/7bfa552d/attachment-0001.html
Message: 5 Date: Sat, 20 May 2017 15:07:04 -0700 From: Jardy Dawson jardy72@yahoo.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: DA466B25-CD12-4633-B731-5B3B12630FC0@yahoo.com Content-Type: text/plain; charset="us-ascii"
Unsub yourself.
Jardy Dawson WA7JRD Ham Radio
Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that!
On May 20, 2017, at 14:59, Rich Baker rbakedq@gmail.com wrote:
Unsubscribe me from this list NOW.
On Sat, May 20, 2017 at 3:36 PM,
Jim Unroe rock.unroe@gmail.com wrote:
On Sat, May 20, 2017 at 11:08 AM,
Herb Gerhardt hgerhardt@wavecable.com wrote:
I have been fighting similar
problems on Win10 on my Baofeng UV-5R+. I too
rolled back the driver to
3.2.0.0 to get my "genuine" cable that I purchase
from HRO to work once I
upgraded to Win10. It worked fine on Win7 and never
had a problem with the latest
driver but would not work on Win10 till I
rolled the driver back.
I then turned off the auto driver updates for this
device. Everything
worked fine after rolling the driver back.
A few months later when I
tried to read the radio again, it would not
connect. I checked the
driver and it was still the 3.2.0.0 driver in my
listing. It took me
several days till I updated the driver to the latest
driver which of course did
not work, but when I rolled it back again the
3.2.0.0 driver from the pick
list for this device, it began to work again.
Don't ask me what is going on
but then set it back for auto updates. I will
now just roll the driver back
every time I want to use this cable.
I suggest you try to update
your driver and then roll it back again to
3.2.0.0 to see if that works
for you. I know it sounds stupid but it is
worth a try since it worked
for me.
Herb, KB7UVC NW APRS Group, West Sound
Coordinator
Our WEB Site: http://blog.nwaprs.info/
There is no need to disable
updates. If Windows does update your
Prolific driver, the previous
driver is still installed. All you have
to do is go into Device Manager
and re-select the driver version that
you want to use. I keep several
Prolific driver versions installed and
switch between then at will for
testing purposes.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at
rbakedq@gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq@gmail.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/ef1b4428/attachment-0001.html
Message: 6 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jim McCorison jimmcc@mccorison.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: 3E9DA26F-DC85-4AA2-9A7E-AF109E11437C@mccorison.com Content-Type: text/plain; charset="us-ascii"
Wow! What a polite request. I just can't try and help you fast enough.
Not.
Jim McCorison Orcas Island, WA
On May 20, 2017, at 2:59 PM, Rich
Baker rbakedq@gmail.com wrote:
Unsubscribe me from this list
NOW.
On Sat, May 20, 2017 at 3:36
PM, Jim Unroe rock.unroe@gmail.com wrote:
On Sat, May 20, 2017 at 11:08
AM, Herb Gerhardt hgerhardt@wavecable.com wrote:
I have been fighting
similar problems on Win10 on my Baofeng UV-5R+. I too
rolled back the driver to
3.2.0.0 to get my "genuine" cable that I purchase
from HRO to work once I
upgraded to Win10. It worked fine on Win7 and never
had a problem with the
latest driver but would not work on Win10 till I
rolled the driver
back. I then turned off the auto driver updates for this
device. Everything
worked fine after rolling the driver back.
A few months later when I
tried to read the radio again, it would not
connect. I checked
the driver and it was still the 3.2.0.0 driver in my
listing. It took me
several days till I updated the driver to the latest
driver which of course
did not work, but when I rolled it back again the
3.2.0.0 driver from the
pick list for this device, it began to work again.
Don't ask me what is
going on but then set it back for auto updates. I will
now just roll the driver
back every time I want to use this cable.
I suggest you try to
update your driver and then roll it back again to
3.2.0.0 to see if that
works for you. I know it sounds stupid but it is
worth a try since it
worked for me.
Herb, KB7UVC NW APRS Group, West Sound
Coordinator
Our WEB Site: http://blog.nwaprs.info/
There is no need to disable
updates. If Windows does update your
Prolific driver, the previous
driver is still installed. All you have
to do is go into Device
Manager and re-select the driver version that
you want to use. I keep
several Prolific driver versions installed and
switch between then at will
for testing purposes.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich
at rbakedq@gmail.com
To unsubscribe, send an email
to chirp_users-unsubscribe@intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq@gmail.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K2SON at
jimmcc@mccorison.com
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/4f76cc98/attachment-0001.html
Message: 7 Date: Sat, 20 May 2017 19:29:42 -0400 From: Rich Baker rbakedq@gmail.com Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Jardy Dawson jardy72@yahoo.com, Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID:
CAELWbPGOpWuJE5WYt0n8CN9u8q9+PzH5swHspN+D6J=zBNbSFg@mail.gmail.com Content-Type: text/plain; charset="utf-8"
I have done that over 10 times now. It does not work.
On Sat, May 20, 2017 at 6:06 PM, Jardy Dawson via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
You have to do that yourself by
READING THE LINKS AT THE BOTTOM OF EACH
EMAIL.
Jardy Dawson WA7JRD Ham Radio
Message relayed from secret
Hillary Clinton server, located in the
basement of her house. OOPS,
you aren't supposed to know that!
On May 20, 2017, at 14:58, Rich
Baker rbakedq@gmail.com wrote:
Unsubscribe me from this list
NOW.
On Sat, May 20, 2017 at 1:59 PM,
Steve Sergeant stevesgt@effable.com
wrote:
Just to ping the group again:
Has anybody out there had
recent luck programming the Leixen VV-898E
using a recent build of Chirp
on MacOS?
On 5/2/17 0:08 AM, Steve
Sergeant wrote:
I just installed
chirp-daily-20170501.app to try. I am attempting to
copy setups from one
Leixen VV-898E radio into several others.
However, a fraction of a
second after the screen fills with the data
from the radio, Chirp
unexpectedly quits, and I'm given the opportunity
to send a report to
Apple.
My system is:
Macbook Air 11"
(MacBookAir6,1)
MacOS X 10.11.6
(15G1421)
4GB RAM
The last line in
.chirp/debug.log reads:
/Users/username/Applications/chirp-daily-20170501.app/Conten
ts/MacOS/../Resources/chirp/chirpw:143:
PangoWarning: Invalid
UTF-8 string passed to pango_layout_set_text()
gtk.main()
I'm using the
osx-pl2303-installer.pkg for my serial driver. This is
currently the only radio
for which I have a programming cable.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich
at rbakedq@gmail.com
To unsubscribe, send an email
to chirp_users-unsubscribe@intrep
id.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350
<(914)%20736-1350>
Cell: 917-922-2463
<(917)%20922-2463>
Email: rbakedq@gmail.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at
jardy72@yahoo.com
To unsubscribe, send an email to
chirp_users-unsubscribe@
intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at
rbakedq@gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe@
intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq@gmail.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/b15c20c7/attachment-0001.html
Message: 8 Date: Sat, 20 May 2017 19:30:55 -0400 From: Rich Baker rbakedq@gmail.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID:
CAELWbPGYBw51s9AL8BoZuUighp_aUj05Dfj_vL9ZWKyqidhp=Q@mail.gmail.com Content-Type: text/plain; charset="utf-8"
Tried to unsubscribe over 10 times both on the website and by sending emails.
On Sat, May 20, 2017 at 6:06 PM, Jim McCorison jimmcc@mccorison.com wrote:
Wow! What a polite request. I just
can't try and help you fast enough.
Not.
Jim McCorison Orcas Island, WA
On May 20, 2017, at 2:59 PM, Rich
Baker rbakedq@gmail.com wrote:
Unsubscribe me from this list
NOW.
On Sat, May 20, 2017 at 3:36 PM,
Jim Unroe rock.unroe@gmail.com wrote:
On Sat, May 20, 2017 at 11:08
AM, Herb Gerhardt hgerhardt@wavecable.com
wrote:
I have been fighting
similar problems on Win10 on my Baofeng UV-5R+. I
too
rolled back the driver to
3.2.0.0 to get my "genuine" cable that I
purchase
from HRO to work once I
upgraded to Win10. It worked fine on Win7 and
never
had a problem with the
latest driver but would not work on Win10 till I
rolled the driver
back. I then turned off the auto driver updates for
this
device. Everything
worked fine after rolling the driver back.
A few months later when I
tried to read the radio again, it would not
connect. I checked
the driver and it was still the 3.2.0.0 driver in my
listing. It took me
several days till I updated the driver to the
latest
driver which of course
did not work, but when I rolled it back again the
3.2.0.0 driver from the
pick list for this device, it began to work
again.
Don't ask me what is
going on but then set it back for auto updates. I
will
now just roll the driver
back every time I want to use this cable.
I suggest you try to
update your driver and then roll it back again to
3.2.0.0 to see if that
works for you. I know it sounds stupid but it is
worth a try since it
worked for me.
Herb, KB7UVC NW APRS Group, West Sound
Coordinator
Our WEB Site: http://blog.nwaprs.info/
There is no need to disable
updates. If Windows does update your
Prolific driver, the previous
driver is still installed. All you have
to do is go into Device
Manager and re-select the driver version that
you want to use. I keep
several Prolific driver versions installed and
switch between then at will
for testing purposes.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich
at rbakedq@gmail.com
To unsubscribe, send an email
to chirp_users-unsubscribe@intrep
id.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350
<(914)%20736-1350>
Cell: 917-922-2463
<(917)%20922-2463>
Email: rbakedq@gmail.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K2SON at
jimmcc@mccorison.com
To unsubscribe, send an email to
chirp_users-unsubscribe@
intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at
rbakedq@gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe@
intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq@gmail.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/70cc1511/attachment-0001.html
Message: 9 Date: Sat, 20 May 2017 18:03:34 -0700 From: Jim McCorison jimmcc@mccorison.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: 20885233-494D-4BE4-B06E-CDBE22B4C2BF@mccorison.com Content-Type: text/plain; charset="utf-8"
Perhaps it you reached out with a polite request along the lines of ?I?m having problems unsubscribing from this list. I?ve sent an unsubscribe request email without success and I?ve tried the website without success. Does any body have any ideas what I?m doing wrong?? Bonus points for sending it as a separate thread with s subject of something like ?Need help. Problems unsubscribing." Such an inquiry will probably get you a lot more assistance than just throwing a grenade into the mailing list.
Jim McCorison Orcas Island, WA
On May 20, 2017, at 4:30 PM, Rich
Baker rbakedq@gmail.com wrote:
Tried to unsubscribe over 10 times
both on the website and by sending emails.
On Sat, May 20, 2017 at 6:06 PM,
Jim McCorison <jimmcc@mccorison.com mailto:jimmcc@mccorison.com> wrote:
Wow! What a polite request. I just
can't try and help you fast enough.
Not.
Jim McCorison Orcas Island, WA
On May 20, 2017, at 2:59 PM, Rich
Baker <rbakedq@gmail.com mailto:rbakedq@gmail.com> wrote:
Unsubscribe me from this list
NOW.
On Sat, May 20, 2017 at 3:36
PM, Jim Unroe <rock.unroe@gmail.com mailto:rock.unroe@gmail.com> wrote:
On Sat, May 20, 2017 at 11:08
AM, Herb Gerhardt <hgerhardt@wavecable.com mailto:hgerhardt@wavecable.com> wrote:
I have been fighting
similar problems on Win10 on my Baofeng UV-5R+. I too
rolled back the driver to
3.2.0.0 to get my "genuine" cable that I purchase
from HRO to work once I
upgraded to Win10. It worked fine on Win7 and never
had a problem with the
latest driver but would not work on Win10 till I
rolled the driver
back. I then turned off the auto driver updates for this
device. Everything
worked fine after rolling the driver back.
A few months later when I
tried to read the radio again, it would not
connect. I checked
the driver and it was still the 3.2.0.0 driver in my
listing. It took me
several days till I updated the driver to the latest
driver which of course
did not work, but when I rolled it back again the
3.2.0.0 driver from the
pick list for this device, it began to work again.
Don't ask me what is
going on but then set it back for auto updates. I will
now just roll the driver
back every time I want to use this cable.
I suggest you try to
update your driver and then roll it back again to
3.2.0.0 to see if that
works for you. I know it sounds stupid but it is
worth a try since it
worked for me.
Herb, KB7UVC NW APRS Group, West Sound
Coordinator
Our WEB Site: http://blog.nwaprs.info/ http://blog.nwaprs.info/
There is no need to disable
updates. If Windows does update your
Prolific driver, the previous
driver is still installed. All you have
to do is go into Device
Manager and re-select the driver version that
you want to use. I keep
several Prolific driver versions installed and
switch between then at will
for testing purposes.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com
mailto:chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Rich
at rbakedq@gmail.com mailto:rbakedq@gmail.com
To unsubscribe, send an email
to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350
Cell:
917-922-2463 tel:(917)%20922-2463
Email: rbakedq@gmail.com
mailto:rbakedq@gmail.com_______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com
mailto:chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K2SON
at jimmcc@mccorison.com mailto:jimmcc@mccorison.com
To unsubscribe, send an email
to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com
mailto:chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Rich at
rbakedq@gmail.com mailto:rbakedq@gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq@gmail.com
mailto:rbakedq@gmail.com_______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com
mailto:chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K2SON at
jimmcc@mccorison.com mailto:jimmcc@mccorison.com
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/049c5d1b/attachment-0001.html
Message: 10 Date: Sat, 20 May 2017 19:40:49 -0600 From: NNN Wx nthreewx@gmail.com Subject: [chirp_users] FT2D To: chirp_users@intrepid.danplanet.com Message-ID: EB99DD23-C6B9-482B-AC28-220025DC2B3B@gmail.com Content-Type: text/plain; charset=utf-8
I see ?bug? numbers 3325 and 3257 from last year, hoping support for Yaesu FT2D radio will work. It?s in the wish list, and doesn?t seem to need hardware for testing. I?m interested in getting chirp to work, and for some insights into how to get the serial connection to work on Macintosh OS X 10.12.5.
HOW CAN I HELP (assuming this just needs effort)??
Message: 11 Date: Sun, 21 May 2017 02:25:30 +0000 (UTC) From: Bob Decker k7bd@yahoo.com Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: "chirp_users@intrepid.danplanet.com" chirp_users@intrepid.danplanet.com Message-ID: 1930811399.2660365.1495333530472@mail.yahoo.com Content-Type: text/plain; charset="utf-8"
Your method of removal from list did not work. I must cut back mailwh9ch I do not use.? Remove my address. The only other way to remove youre-mail by listing it as spam.ThanksBob
On Saturday, May 20, 201712:00 PM, "chirp_users-request@intrepid.danplanet.com" chirp_users-request@intrepid.danplanet.com wrote:
Send chirp_users mailing list submissions to ??? chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit ??? http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to ??? chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at ??? chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."
Today's Topics:
? 1. RepeaterBook Proximety Not Accurate? (John Kobeck) ? 2. Re: RepeaterBook Proximety Not Accurate? (Jim Unroe) ? 3. Re: Cannot read Baofeng BF-888S (Herb Gerhardt) ? 4. Re: Cannot read Baofeng BF-888S (Amnon Zohar) ? 5. Re: Cannot read Baofeng BF-888S (Glenn At Home) ? 6. Leixen VV-898E on MacOS? (was: ...daily-20170501??? repeatable ? ? ? crash) (Steve Sergeant)
Message: 1 Date: Fri, 19 May 2017 23:04:47 -0400 From: John Kobeck johnkobeck@me.com Subject: [chirp_users] RepeaterBook Proximety Not Accurate? To: chirp_users@intrepid.danplanet.com Message-ID: 5F40902E-156A-415A-B687-A0118642A496@me.com Content-Type: text/plain; charset=utf-8
Hello Chirpers;
I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range?
73s KC2MPG
Message: 2 Date: Sat, 20 May 2017 05:48:35 -0400 From: Jim Unroe rock.unroe@gmail.com Subject: Re: [chirp_users] RepeaterBook Proximety Not Accurate? To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: ??? CADnO8U7LPAPZM6s2Y6mtYQd1qz+t+QNJR9xDXG_AAX2kbBvqug@mail.gmail.com Content-Type: text/plain; charset="UTF-8"
On Fri, May 19, 2017 at 11:04 PM, John Kobeck johnkobeck@me.com wrote:
Hello Chirpers;
I have a question. I am trying to
program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range?
73s KC2MPG
Using "Import from data source", "Location" = 10001 and "Band" = "2 meters (144MHz)", I the following numbers of repeaters are retrieved.
Distance: # of repeaters 15: 50 100: 367 300: 1387
Jim KC9HI
Message: 3 Date: Sat, 20 May 2017 08:08:14 -0700 From: "Herb Gerhardt" hgerhardt@wavecable.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "'Discussion of CHIRP'" chirp_users@intrepid.danplanet.com Message-ID: 001301d2d17a$e7936ea0$b6ba4be0$@com Content-Type: text/plain;??? charset="us-ascii"
I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back.
A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable.
I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me.
Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S
I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio.
Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing.
I tried four different BF-888S and neither can be read.
However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S.
Has anyone met with this problem?
--
YT9TP, Pedja http://www.yt9tp.iz.rs
This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
Message: 4 Date: Sat, 20 May 2017 18:23:30 +0300 From: Amnon Zohar amnon.zohar@gmail.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: ??? CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A@mail.gmail.com Content-Type: text/plain; charset="utf-8"
I guess some update of win10 change some part of the driver without changing the driver version number. Redowngrading probably fix this. But this just a wild guess. The solution is important. The reason is less important
?????? 20 ???? 2017 18:09,? "Herb Gerhardt" hgerhardt@wavecable.com ???:
I have been fighting similar
problems on Win10 on my Baofeng UV-5R+.? I too
rolled back the driver to 3.2.0.0
to get my "genuine" cable that I purchase
from HRO to work once I upgraded
to Win10.? It worked fine on Win7 and
never had a problem with the latest
driver but would not work on Win10 till I
rolled the driver back.? I then
turned off the auto driver updates for this
device.? Everything worked fine
after rolling the driver back.
A few months later when I tried to
read the radio again, it would not
connect.? I checked the driver and
it was still the 3.2.0.0 driver in my
listing.? It took me several days
till I updated the driver to the latest
driver which of course did not
work, but when I rolled it back again the
3.2.0.0 driver from the pick list
for this device, it began to work again.
Don't ask me what is going on but
then set it back for auto updates.? I
will now just roll the driver back
every time I want to use this cable.
I suggest you try to update your
driver and then roll it back again to
3.2.0.0 to see if that works for
you.? I know it sounds stupid but it is
worth a try since it worked for
me.
Herb, KB7UVC NW APRS Group, West Sound
Coordinator
Our WEB Site:? http://blog.nwaprs.info/
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com]
On Behalf Of YT9TP -
Pedja Sent: Friday, May 19, 2017 1:08
AM
To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Cannot read
Baofeng BF-888S
I have strange issue with Windows
10, prolific serial adapter and BF-888S.
It reports unable to download from
radio.
Driver is proper (version 3.2.0.0,
update is disabled), and Chirp works
fine with the same adapter and other
radio (Baofeng UV-B5) reading and writing.
I tried four different BF-888S and
neither can be read.
However, when I use the same USB
adapter on my old Windows XP computer,
Chirp easily reads and writes
those BF-888S.
Has anyone met with this problem?
--
YT9TP, Pedja http://www.yt9tp.iz.rs
This email has been checked for
viruses by Avast antivirus software.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at
amnon.zohar@gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe@
intrepid.danplanet.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/ec65c2c2/attachment-0001.html
Message: 5 Date: Sat, 20 May 2017 11:13:04 -0500 From: "Glenn At Home" GlennErvin@cableone.net Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Message-ID: 047601d2d183$f683cf00$0601a8c0@NUCPPYH Content-Type: text/plain; charset="utf-8"
I wonder if you did not reboot windows soon enough to solidify the change. You would think that this would not matter, but maybe Windows needs to reboot for changes such as the driver setting. Glenn I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back.
A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable.
I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me.
Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S
I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio.
Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing.
I tried four different BF-888S and neither can be read.
However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S.
Has anyone met with this problem?
--
YT9TP, Pedja http://www.yt9tp.iz.rs
This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/c0433d81/attachment-0001.html
Message: 6 Date: Sat, 20 May 2017 10:59:00 -0700 From: Steve Sergeant stevesgt@effable.com Subject: [chirp_users] Leixen VV-898E on MacOS? (was: ??? ...daily-20170501??? repeatable crash) To: chirp_users@intrepid.danplanet.com Message-ID: 7623fd03-20f3-5351-6a42-7fc3f405c22a@effable.com Content-Type: text/plain; charset=utf-8
Just to ping the group again:
Has anybody out there had recent luck programming the Leixen VV-898E using a recent build of Chirp on MacOS?
On 5/2/17 0:08 AM, Steve Sergeant wrote:
I just installed
chirp-daily-20170501.app to try. I am attempting to
copy setups from one Leixen
VV-898E radio into several others.
However, a fraction of a second
after the screen fills with the data
from the radio, Chirp unexpectedly
quits, and I'm given the opportunity
to send a report to Apple.
My system is:
Macbook Air 11" (MacBookAir6,1) MacOS X 10.11.6 (15G1421) 4GB RAM
The last line in .chirp/debug.log
reads:
/Users/username/Applications/chirp-daily-20170501.app/ Contents/MacOS/../Resources/chirp/chirpw:143:
PangoWarning: Invalid UTF-8 string
passed to pango_layout_set_text()
? gtk.main()
I'm using the
osx-pl2303-installer.pkg for my serial driver. This is
currently the only radio for which
I have a programming cable.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
End of chirp_users Digest, Vol 101, Issue 19
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170521/7b6dbd28/attachment-0001.html
Message: 12 Date: Sat, 20 May 2017 21:28:16 -0500 From: Carrie Jackson mssjacksonifyournasty@gmail.com Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: Bob Decker k7bd@yahoo.com, Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: 93a354da-a162-4ad8-a2e4-25a707fed0f1@Spark Content-Type: text/plain; charset="utf-8"
Carrie Jackson liked your e-mail
Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8&uo=4&at= 10l6UJ&ct=Spark_QR_viral)
Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8&uo=4&at= 10l6UJ&ct=Spark_QR_viral)
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170520/1bba98f9/attachment-0001.html
Message: 13 Date: Sun, 21 May 2017 13:58:24 -0400 From: Joe Puma theprogramllc@yahoo.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: 762A954A-D894-4632-A374-F805FE65E9A1@yahoo.com Content-Type: text/plain; charset="us-ascii"
Rich do it yourself. Read bottom of email.
Sent from my iPhone
On May 20, 2017, at 5:59 PM, Rich
Baker rbakedq@gmail.com wrote:
Unsubscribe me from this list
NOW.
On Sat, May 20, 2017 at 3:36
PM, Jim Unroe rock.unroe@gmail.com wrote:
On Sat, May 20, 2017 at 11:08
AM, Herb Gerhardt hgerhardt@wavecable.com wrote:
I have been fighting
similar problems on Win10 on my Baofeng UV-5R+. I too
rolled back the driver to
3.2.0.0 to get my "genuine" cable that I purchase
from HRO to work once I
upgraded to Win10. It worked fine on Win7 and never
had a problem with the
latest driver but would not work on Win10 till I
rolled the driver
back. I then turned off the auto driver updates for this
device. Everything
worked fine after rolling the driver back.
A few months later when I
tried to read the radio again, it would not
connect. I checked
the driver and it was still the 3.2.0.0 driver in my
listing. It took me
several days till I updated the driver to the latest
driver which of course
did not work, but when I rolled it back again the
3.2.0.0 driver from the
pick list for this device, it began to work again.
Don't ask me what is
going on but then set it back for auto updates. I will
now just roll the driver
back every time I want to use this cable.
I suggest you try to
update your driver and then roll it back again to
3.2.0.0 to see if that
works for you. I know it sounds stupid but it is
worth a try since it
worked for me.
Herb, KB7UVC NW APRS Group, West Sound
Coordinator
Our WEB Site: http://blog.nwaprs.info/
There is no need to disable
updates. If Windows does update your
Prolific driver, the previous
driver is still installed. All you have
to do is go into Device
Manager and re-select the driver version that
you want to use. I keep
several Prolific driver versions installed and
switch between then at will
for testing purposes.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich
at rbakedq@gmail.com
To unsubscribe, send an email
to chirp_users-unsubscribe@intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq@gmail.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Puma
at theprogramllc@yahoo.com
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170521/ec3050d6/attachment-0001.html
Message: 14 Date: Sun, 21 May 2017 13:59:32 -0400 From: Joe Puma theprogramllc@yahoo.com Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: 9FDE6A55-5F80-439E-AFFE-51E5AF484F0D@yahoo.com Content-Type: text/plain; charset="us-ascii"
Lol
Sent from my iPhone
On May 20, 2017, at 6:06 PM, Jim
McCorison jimmcc@mccorison.com wrote:
Wow! What a polite request. I just
can't try and help you fast enough.
Not.
Jim McCorison Orcas Island, WA
On May 20, 2017, at 2:59 PM,
Rich Baker rbakedq@gmail.com wrote:
Unsubscribe me from this list
NOW.
On Sat, May 20, 2017 at
3:36 PM, Jim Unroe rock.unroe@gmail.com wrote:
On Sat, May 20, 2017 at
11:08 AM, Herb Gerhardt hgerhardt@wavecable.com wrote:
I have been fighting
similar problems on Win10 on my Baofeng UV-5R+. I too
rolled back the
driver to 3.2.0.0 to get my "genuine" cable that I purchase
from HRO to work once
I upgraded to Win10. It worked fine on Win7 and never
had a problem with
the latest driver but would not work on Win10 till I
rolled the driver
back. I then turned off the auto driver updates for this
device.
Everything worked fine after rolling the driver back.
A few months later
when I tried to read the radio again, it would not
connect. I
checked the driver and it was still the 3.2.0.0 driver in my
listing. It
took me several days till I updated the driver to the latest
driver which of
course did not work, but when I rolled it back again the
3.2.0.0 driver from
the pick list for this device, it began to work again.
Don't ask me what is
going on but then set it back for auto updates. I will
now just roll the
driver back every time I want to use this cable.
I suggest you try to
update your driver and then roll it back again to
3.2.0.0 to see if
that works for you. I know it sounds stupid but it is
worth a try since it
worked for me.
Herb, KB7UVC NW APRS Group, West
Sound Coordinator
Our WEB Site:
There is no need to
disable updates. If Windows does update your
Prolific driver, the
previous driver is still installed. All you have
to do is go into Device
Manager and re-select the driver version that
you want to use. I keep
several Prolific driver versions installed and
switch between then at
will for testing purposes.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to
Rich at rbakedq@gmail.com
To unsubscribe, send an
email to chirp_users-unsubscribe@intrepid.danplanet.com
-- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567
Home: 914-736-1350 Cell:
917-922-2463
Email: rbakedq@gmail.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K2SON
at jimmcc@mccorison.com
To unsubscribe, send an email
to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joe Puma
at theprogramllc@yahoo.com
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.com
-------------- next part
An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/ attachments/20170521/161a0e09/attachment-0001.html
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
End of chirp_users Digest, Vol 101, Issue 20
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Stuart Rauh at stuart@rauhnet.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com