On 10 May 2020 at 12:20 Richard K Parrish <ritchkp@gmail.com> wrote:

Debug report for Yaesu IT 50r

 

Richard K. Parrish, NREMT-P, PC

Course Administrator, Woodstock FD, Com 5

35 Park Drive

Woodstock, NY 12498

845-679-6504

Ritchkp@gmail.com

 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bernhard Hailer
Sent: Saturday, May 09, 2020 9:40 PM
To: chirp_users@intrepid.danplanet.com
Subject: Re: [chirp_users] Using Chirp to program the Yaesu FT-50r

Could you provide us with a debug log as described in https://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues, please?

73,
Bernhard AE6YN

On 09-May-20 08:56, Richard K Parrish wrote:

Trying to Program a Yaesu FT-50r.  I follow the instructions to hold the mon key and press the PTT 3 times.  Unit goes into Clone mode, Send, then gets a CERR

Any suggestions?

 

 

Richard K. Parrish, NREMT-P, PC

Course Administrator, Woodstock FD, Com 5

35 Park Drive

Woodstock, NY 12498

845-679-6504

Ritchkp@gmail.com

 

_______________________________________________
     

chirp_users mailing list
     

chirp_users@intrepid.danplanet.com
     

http://intrepid.danplanet.com/mailman/listinfo/chirp_users
     

This message was sent to Bernhard Hailer at ae6yn@arrl.net
     

To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
     

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com