When I plug in the cable I get this in dmesg | tail:
]$ sudo dmesg | tail [ 773.851772] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 773.851833] cp210x 1-1:1.0: device disconnected [ 780.717963] usb 1-1: new full-speed USB device number 7 using xhci_hcd [ 780.860262] usb 1-1: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00 [ 780.860268] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 780.860273] usb 1-1: Product: CP2102 USB to UART Bridge Controller [ 780.860277] usb 1-1: Manufacturer: Silicon Labs [ 780.860281] usb 1-1: SerialNumber: 0001 [ 780.864708] cp210x 1-1:1.0: cp210x converter detected [ 780.866984] usb 1-1: cp210x converter now attached to ttyUSB0
I have a feeling part of my Wouxun KG-UV8E has died!
Thoughts?
73 David N1EA
On Sat, Jan 12, 2019 at 10:22 PM D.J.J. Ring, Jr. n1ea@arrl.net wrote:
Hi,
I have a Wouxun red colored cable, suddenly it no longer works. I have the Wouxun Windows programming software: Doesn't communicate with radio. CHIRP on Win10 and Arch Linux: Same problem, radio doesn't respond.
It used to work, now suddenly it doesn't work!
Is there some way I can check the USB to double jack (1/8 (3.5mm) and 3/32 inch (2.5mm).
I have a club member with the same cable, but it's been 20 days since he was going to come over to test my cable by substitution.
It's either my transceiver or my cable! Only have one hand held that takes this cable!
I only have a 100 MHz dual trace 'scope and a nice RadioShack 22-812 DMM to test with. So I could capture slower pulses. Probably won't be a good test like substitution of working cable.
I know it's a fairly dumb question but you never know until you ask!
73 David N1EA