In the footer of every email you've received and replied to have been the instructions on how to unsubscribe from this list.
Simply responding to each message with "Unsubscribe" will not work, nor will it endear you to the many members of the list, none of whom can do this for you.
The following section is in the footer of each email you receive. All you have to do is send an email from your listed email address (which is shown in the footer) to the unsubscribe address shown in the footer.
=========================================== chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to tbkell@mchsi.com mailto:tbkell@mchsi.com at tbkell@mchsi.com mailto:tbkell@mchsi.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
==============================================
So, in your case, simply use 'tkbell@mchsi.com' to send an email to 'chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com' and you're done.
On 03/30/2017 12:13 PM, Mchsi wrote:
Unsubscribe
Sent from Tom's iPhone
On Mar 30, 2017, at 6:45 AM, Shon Edwards <sre.1966@gmail.com mailto:sre.1966@gmail.com> wrote:
Tried to do this, and tried using our old xp and win 7 machines, as well, with no result. Many errors. I think I'm going to have to send this one back. Running out of time to get a refund through Amazon. I appreciate all your help! 73 de K6QT, Shon
Shon R. Edwards, MA, AG (Czech Republic) Amateur call: K6QT 1039 N 2575 W Layton, UT, 84041-7709 USA Home phone: (801) 444-3445 E-mail: sre.1966@gmail.com mailto:sre.1966@gmail.com
or
Shon Edwards 715 Strawberry Creek Private Rd. Bedford, WY 83112 Cell: (307) 248-2104
On Thu, Mar 30, 2017 at 4:04 AM, Shon Edwards <sre.1966@gmail.com mailto:sre.1966@gmail.com> wrote:
Thanks for all the help everyone! I'll give it a try. Shon R. Edwards, MA, AG (Czech Republic) Amateur call: K6QT 1039 N 2575 W Layton, UT, 84041-7709 USA Home phone: (801) 444-3445 <tel:%28801%29%20444-3445> E-mail: sre.1966@gmail.com <mailto:sre.1966@gmail.com> or Shon Edwards 715 Strawberry Creek Private Rd. Bedford, WY 83112 Cell: (307) 248-2104 <tel:%28307%29%20248-2104> On Thu, Mar 30, 2017 at 3:40 AM, Jim Unroe <rock.unroe@gmail.com <mailto:rock.unroe@gmail.com>> wrote: On Wed, Mar 29, 2017 at 11:33 PM, Shon Edwards <sre.1966@gmail.com <mailto:sre.1966@gmail.com>> wrote: > Sorry, I haven't used the site for several years and can't remember how to > find whether Chirp works for a specific radio, in this instance a Jingtong > JT-5988HP, a 12 W dual band HT, which I have a cable for, but have talked > several times with the company and they seem to be telling me if I don't > have Windows 7 or earlier, it won't work. > > Does anyone have any experience concerning this radio? > > Thanks in advance for any help anyone can offer! > > 73 de K6QT, Shon The CHIRP home/wiki page has an extensive list of "Supported Radio Models". If you visit the CHIRP website and somehow don't land on the home page (chirp.danplanet.com <http://chirp.danplanet.com>), then click the "Wiki" tab. I want to say "you can't miss it", but for some reason many people do. The programming cable itself is hardware and does not care which operating system you are using. It is the device driver that interfaces between the USB-to-Serial (UART) chip in the programming cable and the operating system that must be compatible with both. In the case where a programming cable contains a Prolific type UART, the device driver that is automatically installed by Windows (for nearly 10 years) is intentionally incompatible with counterfeit chips. If the driver on the CD supplied will work with Windows 7, it will work with Windows 10. It just has to be a Prolific device driver with a version of v3.3.2.105 or before. But I recommend that you ignore the driver CD provided by the vendor and get the Prolific v3.2.0.0 device driver from a link on the miklor.com <http://miklor.com> website. Then follow the guide to get it installed. This Windows Vista device driver from 2007 will work with both counterfeit and genuine Prolific UART chips from Windows Vista through Windows 10. You need v2.0.2.1 for Windows XP. Jim _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to Shon, K6QT at sre.1966@gmail.com <mailto:sre.1966@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to tbkell@mchsi.com mailto:tbkell@mchsi.com at tbkell@mchsi.com mailto:tbkell@mchsi.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Aubrey Turner at aubrey.c.turner@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com