21 May
2023
21 May
'23
6:19 p.m.
On Sun, May 21, 2023 at 9:07 PM David Osborne dosborne1969@gmail.com wrote:
I have tried several different ways to enter the values with no luck. Here are the values. QT/DQT Dec is 203.5 QT/DQT Enc is 203.5
You don't have to program a receive tone so this will set it up with a TX tone only. Receive is using carrier squelch only.
Tone Mode: Tone Tone: 203.5 <-- used to set TX CTCSS tone in radio Tone Squelch: {blank}
But if you want to set up both RX and TX tones this is how it should be set up.
Tone Mode: TSQL Tone: {blank} Tone Squelch: 203.5 <-- used to set both RX and TX CTCSS tones in radio
Jim KC9HI