Sorry for the OT bandwidth.
 
Another subtlety.  YPlog will WRITE offsets to the radio but does not READ them from the radio.
 
Al
 

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Al Waschka
Sent: Saturday, September 14, 2013 11:22 AM
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] CHIRP and IC-706MkIIG

A few more notes -
 
Memory P1 and P2 in the 706 are 100 and 101 in YPlog and 102 is the Call channel.
 
Al
 
 


From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Al Waschka
Sent: Saturday, September 14, 2013 11:17 AM
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] CHIRP and IC-706MkIIG

OK, I cleared the radio with YPlog.  When placed in the memory mode, the SPLIT and FMTONE indicators were off in the display.  After programming the memories, the SPLIT label was lit in all memories that I programmed an offset into and the FM-TONE label was lit in all programmed memories.  I think I understand the SPLIT, in that I programmed in an offset.  But since I moved the frequencies into different memories, I don't see how it got the tones I originally had in since I didn't enter anything.  Every programmed memory has the FM-TONE label lit, even simplex frequencies that didn't originally have tone in them.  I'm guessing that every programmed memory is loaded with the tone set in the menu.  I don't know how to verify the tone that is loaded into the memory other than trying it on a repeater.  I'll check that out later today.
 
Al
 


From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Joe
Sent: Saturday, September 14, 2013 8:09 AM
To: Discussion of CHIRP
Subject: Re: [chirp_users] CHIRP and IC-706MkIIG

On 9/14/2013 12:29 AM, Al Waschka wrote:
Thanks Guys!  I had given up on this.  I used a Timewave Hamlink USB cable and YPlog.  I downloaded the memories in my 706 (which has an HF problem) and will upload them to my 706MkII replacement.

I'm curious, was YPlog able to write the PL tones (if you had any programmed in to old radio) into the new radio?

Joe

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3408 / Virus Database: 3222/6664 - Release Date: 09/13/13


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3408 / Virus Database: 3222/6665 - Release Date: 09/14/13


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3408 / Virus Database: 3222/6665 - Release Date: 09/14/13