yes, 'tone' should be.


but double check its the right code of 186.2. to open it with. what repeater is it?



From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of Dennis Wage <dwage@dwage.com>
Sent: 25 March 2018 16:25
To: Jardy Dawson; Discussion of CHIRP
Subject: Re: [chirp_users] TSQL / CTCSS
 
Location Name Frequency Duplex Offset Tone rToneFreq cToneFreq DtcsCode DtcsPolarity Mode TStep

Here's what it was:
98 H AL 1 145.23 - 0.6 TSQL 186.2 186.2 23 NN NFM 5

This is what I changed it to:
98 H AL 1 145.23 - 0.6 Tone 186.2 186.2 23 NN NFM 5

Waiting for some chatter. 

Dennis M. Wage

245 Corum Hill Road

On Sun, Mar 25, 2018 at 10:09 AM, Jardy Dawson via chirp_users <chirp_users@intrepid.danplanet.com> wrote:
BTW, it has to be the right tone frequency too, not just turning TSQL on or off.

Jardy Dawson
WA7JRD Ham Radio

Message sent by... Oh who the heck really cares?

On Mar 25, 2018, at 07:15, Dennis Wage <dwage@dwage.com> wrote:

So CTCSS is a more generic term for Tone and TSQL.

Still doesn't answer why I had to hit MONI to hear a repeater conversation.


Dennis M. Wage

245 Corum Hill Road

On Sun, Mar 25, 2018 at 8:28 AM, Jardy Dawson via chirp_users <chirp_users@intrepid.danplanet.com> wrote:
CTCSS usually indicates the tone you must send to activate the repeater.  TSQL usually means a tone must be sent from the repeater or other party so you can hear THEIR signal.  You never NEED to use TSQL. The only time it comes in handy is if you are getting some kind of RFI or interference from another repeater.  Turn TSQL off and you will probably be able to hear the repeater properly. Go to www.miklor.com for answers to FAQs.

Jardy Dawson
WA7JRD Ham Radio

Message sent by... Oh who the heck really cares?

On Mar 25, 2018, at 06:14, Dennis Wage <dwage@dwage.com> wrote:

I have no where else to ask this question.

Is TSQL the same as CTCSS?

The reason I am so intrigued is about this is

The other day my UV-5R was in scan mode and a repeater in Huntsville continually stopped my scan with a carrier or tone, not sure which yet. But I heard no audio. No matter where I set the squelch, even to 0 I got no audio. However, if I hit the Moni button I could hear the guys talking.

What was happening here?

Thanks in advance. 

In 3 weeks I'll be W9BOQ if the FCC grants my vanity call sign.

Whiskey Niner Bravo Oscar Quebec.
Dennis M. Wage

245 Corum Hill Road
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dennis Wage at dwage@dwage.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dennis Wage at dwage@dwage.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com