Bill, With CHIRP set the following columns up as shown below
Frequency=147.180000 Tone Mode=Tone Tone=151.4 Duplex=+ Offset=0.600000 Mode=FM Power=Low or High
Jim
On Sun, Jan 20, 2013 at 5:59 PM, Bill Gabbard wcgabbard1@windstream.netwrote:
** I've a Baofeng UV-5RA and when importing local repeaters in Chirp (only been using since 1/11 & VIP before then & same problem), in Channel Mode it will not ping one of 4 local repeaters but if I set it in VFO Mode, no problems. In Channel Mode, I can hear other local repeaters but one I've programmed; RX Freq.=147.180 TX Freq.=147.780 Tone=151.4 Offset=00.600
FYI, I've 2 other Ts, a Yaseau FT-11 & a B-K LPH-5142 of which both can get the repeater, I can't talk to either of these from my Baofeng While in Channel Mode but can in VFO Mode. Any suggestions appreciated. 73s Bill
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users