Re: [chirp_users] Two Baofeng UV-5R radios but only one works with CHIRP

Jay, Make sure you are using the Latest Daily Build of CHIRP. http://www.miklor.com/COM/UV_CHIRP.php If you are using an older version, such as 0.4.1, the new radio may not be recognized.

John Http://www.miklor.com

On Jun 23, 2015, at 1:38 PM, Jay Planalp jay@planalpmanagement.com wrote:

Hello - I am a new CHIRP user and have two Baofeng UV-5R radios. I was able to get CHIRP to communicate with one radio and uploaded some memory channels. However, when I tried the second radio, I got an error message "The upload was stopped because the firmware of the image (Ver BFB297) does not match that of the radio (BFB299 BFB297). However, when I power on the radios holding the 3 key down, I see that the firmware version of both is the same - BFB297. How do I resolve this??? Thanks. Jay

---

Jay C. Planalp Planalp Management Consulting www.planalpmanagement.com

---

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com