On Mon, Oct 24, 2016 at 10:18 AM, Phil - w2lie w2lie@w2lie.net wrote:
Before I opened up a bug ticket, I wanted to reach out to the mailing list to see if anyone else can direct me to a solution.
I'm attempting to program a Wouxon KG-UV8D transmitter for someone else. I'm using the Chirp Daily Build (20161018) with a true serial cable connection. This cable works fine on my Kenwood and Baofeng radios, so I'm hoping this is the same cable. I've used this cable in the past on older Wouxon Radios without issues.
The radio will not talk to the Wouxon software, and when I attempt to read the radio via Chirp, I receive an error. I'm thinking that this is a new radio and that the firmware has changed slightly, and now Chirp won't handshake.
The error I receive when attempting to read the radio is "Failed to communicate with radio: ord() expected a character, but string of length 0 found"
Any help would be appreciated.
Thanks in advance. 73 Phil / w2lie
Hi Phil,
That fact that the radio won't program with the factory software either is an indication that the cable is not fully plugged into the radio or the radio's cloning process has been changed and a different programming software is required.
Jim KC9HI