5 Apr
2015
5 Apr
'15
4:48 a.m.
I am using the cable from RT Systems to attach my FT60R to the system. When the cable is connected, Port /dev/ttyUSB0 is displayed. If the cable is not connected, no port is displayed in the radio box. However, using the method for which the RT System windows program uses, I get a time out on the Download procedure. The method used is turn the FT60R on holding the [Moni/TCall] key. The dial is rotated to CLONE. The [FW] key is pressed so CLONE blinks and comes back. The OK button is selected and the transfer should take place.
Any ideas?
Jim