I just double check and it is 000.600 enter in. If its one that go up, it goes up .600 or down .600. So I don't know?
On Mon, Nov 9, 2015 at 1:56 PM, K2AHU k2ahu@earthlink.net wrote:
You sure it’s actually changing 600Hz and not another decimal? Sounds basic but it’s been done.
*Wess Tester, K2AHU*
QTH: KP2
www.vihamradio.org
:o)
*From:* chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Lamar Brown *Sent:* Monday, November 9, 2015 15:42 *To:* chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] UV-5R Woes
I have tried to program the UV-5R with Chirp and finally find out that I had to use a different model number to be able to even get the radio to upload to computer. I have added all my channels to the radio and downloaded to radio thinking that everything is fix. I can key the HT and it don't key the repeater. If I have it on channel mode, it shows both +- above the frequency display. It will drop the frequency down 0.600 like it suppose to. Ok if I have it on frequency mode , it shows - and drops down the 0.600 as its suppose to. Still don't key the repeater. I have a Baofeng UV-3 and it keys the repeater, I have a Yaesu FT-250 and it keys the repeater. I'm at my wits end on trying to get this HT program. If someone can please tell me what to do I will really appreciate it.
Danny
KT4DLB
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com