Then do a yum local install chirp-daily_03152012-1.fc16.noarch.rpm

I haven't done much testing with my 2820 recently. Please report back and let us know what happens.

73,

Mike, N0SO

On Mar 15, 2012, at 1:38 AM, Brian Mury <ve7ngr@rac.ca> wrote:

Hello,

I'm having problems uploading to my 2820 (downloading works). The upload

progresses until the CHIRP progress bar has hit 100%, and the 2820

progress bar has *almost* hit 100%, then the window with the CHIRP

progress bar closes, and the radio just sits there saying "CLONE IN",

and showing the progress bar a pixel or two away from completion. I'm

forced to power cycle the radio, at which point it resets to factory

settings.

I'm running Fedora 16, and was using chirp-0.1.12-5.fc16 from the

repository. I've tried upgrading to chirp-0.2.0-1.fc16, also from the

repository, and am seeing the same problem.

I'm using the data port, not the speaker port. I dug out an old Windows

laptop and tried the Icom CS-2820 software - it works, so the radio and

cable both work.

This used to work for me. I haven't used CHIRP in quite some time as I

haven't needed to make any changes to the radio's programming, so

unfortunately I can't say when it stopped working.

Here's the relevant portion of the output when run from a terminal:

----------------------------------------------------------------

Clone thread started

Starting HiSpeed:

000: fe fe fe fe fe fe fe fe   ........

008: fe fe fe fe fe fe fe fe   ........

016: fe fe fe fe ee ef e8 29   .......)

024: 70 00 01 00 00 02 01 fd   p.......

Response:

Switching to 38400 baud

Starting HiSpeed Clone:

000: fe fe fe fe fe fe fe fe   ........

008: fe fe fe fe fe fe ee ef   ........

016: e3 29 70 00 00 fd 00 00   .)p.....

-- Exception: --

Traceback (most recent call last):

File "/usr/lib/python2.7/site-packages/chirpui/clone.py", line 219, in

run

  self.__radio.sync_out()

File "/usr/lib/python2.7/site-packages/chirp/icf.py", line 529, in

sync_out

  clone_to_radio(self)

File "/usr/lib/python2.7/site-packages/chirp/icf.py", line 349, in

clone_to_radio

  raise errors.RadioError("Did not get clone result from radio")

RadioError: Did not get clone result from radio

------

Clone failed: Did not get clone result from radio

Clone thread ended

----------------------------------------------------------------

73, Brian

VE7NGR

_______________________________________________

chirp_users mailing list

chirp_users@intrepid.danplanet.com

http://intrepid.danplanet.com/mailman/listinfo/chirp_users