Off topic????

On Sat, Oct 21, 2023 at 11:15 PM Chuck Hast <kp4djt@gmail.com> wrote:

That is correct, you make sure you have done proper grounding

for YOU prior to dealing with the card. Usually after one scrub,

that was it. It was always new cards that needed that touch or

very old ones that has been setting in a machine in a grubby 

environment. Obviously if you have to do it so much that you

rub the contacts down, there is something wrong elsewhere. 

On Sat, Oct 21, 2023 at 1:43 PM Rich NE1EE <TheDustyKey@imaginarian.org> wrote:

I got the impression that the OP was "streaming" the thought. I suspect it meant that before working on computer internals, pay attention to operator grounding. My experience was that older edge connectors were subject to oxidation. Removing the device and rubbing the edge pins with a "genuine" rubber erase, which contains an abrasive (compare with the eraser that removes polymer lead marks), would scrub off the oxidation. Problem is that used aggressively it tended to wear right through the electrical coating on the pins.

On 2023-10-21 14:10:-0400, you wrote:
>How do you "ground" something with a rubber eraser?
>DR
>N1EA
>
>On Sat, Oct 21, 2023 at 12:48 PM Chuck Hast <<mailto:kp4djt@gmail.com>kp4djt@gmail.com> wrote:
>Doing proper grounding, the old trick used for years was a
>proper rubber pencil eraser.

73 Rich NE1EE

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck Hast at kp4djt@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

--

Chuck -- KP4DJT

HamHotline # 11259

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jerry at kb4oam@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck Hast at kp4djt@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com