I have three Baofeng transceivers:  UV-5RA; UV-82X; GT-3.  I have been unable to program any of them and I was wondering if there are CHIRP fixes or suggestions?  I've purchased two sets of programming cables and deleted Windows 8 and installed Windows 7 Pro since Windows 8 did not seem to work on any of these radios.  Will wait until I hear from Chirp for my next approach.

 

Thank you,

 

Don, K3DBW 

 

Send chirp_users mailing list submissions to
chirp_users@intrepid.danplanet.com

To subscribe or unsubscribe via the World Wide Web, visit
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
chirp_users-request@intrepid.danplanet.com

You can reach the person managing the list at
chirp_users-owner@intrepid.danplanet.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."


Today's Topics:

1. PSA: Permanently disable Yaesu Wires beep
(chirp.cordless@xoxy.net)
2. Re: PSA: Permanently disable Yaesu Wires beep (Milton Hywatt)
3. Re: PSA: Permanently disable Yaesu Wires beep (Silverfox)


----------------------------------------------------------------------

Message: 1
Date: Fri, 14 Mar 2014 15:35:04 -0700
From: chirp.cordless@xoxy.net
Subject: [chirp_users] PSA: Permanently disable Yaesu Wires beep
To: chirp_users@intrepid.danplanet.com
Message-ID: <8DF84871-7989-4E0E-B44C-950F4B344F11@cox.net>
Content-Type: text/plain; charset=us-ascii

I know this isn't directly Chirp related, but it's the right audience,
and this information needs to get widely distributed. Nobody in
my local ham circles knew about it.

If you don't know what the annoying Yaesu Wires beep is,
it's a Yaesu-proprietary internet access feature. It's too easy to
accidentally enable on most Yaesu radios, and it injects a DTMF
tone at the start of every transmission that masks the start of the audio.

It turns out there's a way to silence the beep, even if you accidentally
put the radio in Wires mode. There's a well-done description of
the settings changes for a dozen Yaesu models, and an explanation,
at http://www.sbara.org/downloads/WIRES/
which has both online html versions and downloadable pdfs.

Hope that helps some, and apologies for the noise to the rest of you.

-dan





------------------------------

Message: 2
Date: Fri, 14 Mar 2014 17:50:08 -0700 (PDT)
From: Milton Hywatt mhywattt@yahoo.com>
Subject: Re: [chirp_users] PSA: Permanently disable Yaesu Wires beep
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Message-ID:
<1394844608.89289.YahooMailNeo@web162601.mail.bf1.yahoo.com>
Content-Type: text/plain; charset="us-ascii"

Done it dozens of times on the FT60 and FT8900. Was talking to
someone just the other day who had a tone when he first transmitted.
I told the guy he was using a Yaesu and he was surprised that I knew.
I said he had wires enabled. He found the button and shut it off. There
is a way to program the radio so wires will only work if certain criteria are met
and under normal operation you would never meet it either. There is no
way to enable it under normal or cross band mode.




________________________________
From: "chirp.cordless@xoxy.net" <chirp.cordless@xoxy.net>
To: chirp_users@intrepid.danplanet.com
Sent: Friday, March 14, 2014 6:35 PM
Subject: [chirp_users] PSA: Permanently disable Yaesu Wires beep


I know this isn't directly Chirp related, but it's the right audience,
and this information needs to get widely distributed. Nobody in
my local ham circles knew about it.

If you don't know what the annoying Yaesu Wires beep is,
it's a Yaesu-proprietary internet access feature. It's too easy to
accidentally enable on most Yaesu radios, and it injects a DTMF
tone at the start of every transmission that masks the start of the audio.

It turns out there's a way to silence the beep, even if you accidentally
put the radio in Wires mode. There's a well-done description of
the settings changes for a dozen Yaesu models, and an explanation,
at http://www.sbara.org/downloads/WIRES/
which has both online html versions and downloadable pdfs.

Hope that helps some, and apologies for the noise to the rest of you.

-dan



_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140314/06b5ea51/attachment-0001.html

------------------------------

Message: 3
Date: Fri, 14 Mar 2014 18:13:45 -0700
From: "Silverfox" alan.r.hill@gmail.com>
Subject: Re: [chirp_users] PSA: Permanently disable Yaesu Wires beep
To: "'Milton Hywatt'" mhywattt@yahoo.com>, "'Discussion of CHIRP'"
<chirp_users@intrepid.danplanet.com>
Message-ID: <5323a94a.04c0440a.2691.3b5d@mx.google.com>
Content-Type: text/plain; charset="us-ascii"

One can lock the keyboard and prevent it from happening. There is normally
little need to use the keyboard.

73,

Alan - W6ARH





From: chirp_users-bounces@intrepid.danplanet.com
[mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Milton
Hywatt
Sent: Friday, March 14, 2014 5:50 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] PSA: Permanently disable Yaesu Wires beep



Done it dozens of times on the FT60 and FT8900. Was talking to
someone just the other day who had a tone when he first transmitted.
I told the guy he was using a Yaesu and he was surprised that I knew.
I said he had wires enabled. He found the button and shut it off. There
is a way to program the radio so wires will only work if certain criteria
are met
and under normal operation you would never meet it either. There is no
way to enable it under normal or cross band mode.





_____

From: "chirp.cordless@xoxy.net" <chirp.cordless@xoxy.net>
To: chirp_users@intrepid.danplanet.com
Sent: Friday, March 14, 2014 6:35 PM
Subject: [chirp_users] PSA: Permanently disable Yaesu Wires beep


I know this isn't directly Chirp related, but it's the right audience,
and this information needs to get widely distributed. Nobody in
my local ham circles knew about it.

If you don't know what the annoying Yaesu Wires beep is,
it's a Yaesu-proprietary internet access feature. It's too easy to
accidentally enable on most Yaesu radios, and it injects a DTMF
tone at the start of every transmission that masks the start of the audio.

It turns out there's a way to silence the beep, even if you accidentally
put the radio in Wires mode. There's a well-done description of
the settings changes for a dozen Yaesu models, and an explanation,
at http://www.sbara.org/downloads/WIRES/
which has both online html versions and downloadable pdfs.

Hope that helps some, and apologies for the noise to the rest of you.

-dan



_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20140314/8930431d/attachment-0001.html

------------------------------

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users


End of chirp_users Digest, Vol 63, Issue 8
******************************************