Mine would not program without the volume control turned up.
On Tue, Aug 23, 2016 at 6:14 AM, Jim Unroe <rock.unroe@gmail.com> wrote:
On Mon, Aug 22, 2016 at 11:30 PM, Frederick R. McDougall
<frmcdo@gmail.com> wrote:
> On my uv5rc unit the volume control does control the volume of the
> speaker/mic.
As it should. The volume control controls the level of audio to the
internal speaker and to a external speaker properly connect to the
audio out lines.
> Thus it would also control the amplitude of the radio to
> computer signal while reading the radio.
Incorrect. As I mentioned earlier, the radio communicates with the
computer via a TTL level serial communication (+3.3 volts/0 volts).
There is no speaker out or mic in audio involved. There aren't even
any wires connected to the audio out or mic in because they are not
needed or used for serial communications.
It is not AFSK (audio frequency shift keying) like over-the-air
digital communications. That would be an added complexity that isn't
required.
Jim KC9HI
_______________________________________________ This message was sent to Donnie Tate at donnietate@gmail.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Donnie L. Tate
185 Memory Lane Drive
Gate City VA 24251
276-386-7677
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken at ken@wa0sbu.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com