Try using FT-60 Commander software (free), found at www.kc8ung.com. Use the alternate write method. Also check your cable on Device Manager and see if it shows to be Prolific. If it is, try rolling the driver to 3.2.0.0. Check www.miklor.com for more info. Push the cable in firmly, too.

Jardy Dawson WA7JRD

Message sent through sub space hailing frequencies using the Universal Translator.

On Feb 13, 2019, at 16:34, Bert Garcia <bertgarcia73@gmail.com> wrote:

I can download from my FT-60 into Chirp, but it will not upload to the radio. Error says communications failure. My FT-60 is in the ---RX--- mode. Any suggestions?
Bert

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com