On Tue, May 28, 2013 at 11:59 PM, Madison Jones w5mj@hal-pc.org wrote:
I am a new user to the Baofeng F-11 so I might not be getting things correct, though I have reinstalled the cloning cable driver [it is on Com 3] using the Win7 procedure outlined by Wouxun and reinstalled Chirp. ***
When I initially obtained the radio, I pulled up the stock channel program, changed it around a little and uploaded it to the radio using Chirp. A few days later I manually programmed several of the memories and deleted most of the stock memories.****
Now, when going to the Radio tab on the Chirp software and attempting to Download from Radio, I get an error message which says “radio did not respond.” I get the same error message when attempting to upload to the radio from Chirp. Suggestions?****
Madison Jones****
W5MJ****
Madison,
This is most likely caused by the programming cable not being plugged fully into the F-11. This is a common problem with the UV-5R and it equivalents.
If you haven't already, visit the Miklor.com website and take a look at the "Errors and Error Messages" page for guidance.
Jim KC9HI