Thanks Jim I did the research and found out what I needed to do but I always appreciate help from a fellow ham

Sent via the Samsung GALAXY S®4, an AT&T 4G LTE smartphone

-------- Original message --------
From: Jim Unroe <rock.unroe@gmail.com>
Date: 02/20/2016 06:24 (GMT-07:00)
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Subject: Re: [chirp_users] PL Send and receive

On Fri, Feb 19, 2016 at 9:20 PM, James Pratt <no8rf@cox.net> wrote:
> How do I set up PL’s in my radio for both send and receive, I what the same
> PL for send and receive on simplex freq 465.xxxx I can do this in my
> Motorola JT1000 why not in your chrip or am I missing something.
>
>
>
> James

Hi James,

The first thing that you should do is to click View and make sure that
"Hide unused fields" is enabled (it should be the default).

Now for all channels where you want the same TX and RX CTCSS tone do this...

Tone Mode = TSQL
ToneSql = {the CTCSS tone frequency}

If you want to learn what the CHIRP columns are and how they affect
one another, take a look at the guides linked to in section 6 of the
CHIRP page on the miklor.com website.

http://www.miklor.com/COM/UV_CHIRP.php#guides

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to James at no8rf@cox.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com