I use cables from rt systems.
Never had one not work.On your cable bake sure it is seating all the way in .
I have seen this problem on a friend's trying to help him get his Baeofeng UV - 5 R programed.
Luckily I had my cable out in my vehicle in his driveway.
Rather than getting stressed we used my cable and it worked first time we tried.
On Wednesday, June 5, 2019 gearjam <chirp_users@intrepid.danplanet.com> wrote:I bought $20.00 program cable from Amazon. Had to download driver CDMv2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Readdata from radio" a small window opens that says "Read data from radio"with three tabs, "Read", "Cancel" and "Help". When I click on Read I getanother small window that says "Operation Prompt" with the message "!Fail connect with transceiver". When I click on Help nothing happens.Cable is firmly plugged into radio to the second click. Tried dampeningthe pins for a better connection as per the Baofeng instructions. I'vealso tried the radio on both channel mode and frequency mode. CheckedMiklor.com to no avail. I accidently keyed the PPT button and heard abuzz from my computer speakers so I believe I have a connection with thecable. Any advice???????Steve Prime_______________________________________________chirp_users mailing listThis message was sent to Jock at kc6iih@aol.comTo unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Silver Fox at alan.r.hill@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com