On 24/12/13 4:25 AM, George Gillespie wrote:
Can you tell me how to program the Baofeng UV-5R HT
Just did one myself. It's easy:
First, you need to install the correct drivers for your cable and OS (Beware, there are a lot of fake Prolific chips out there, these need special attention with the drivers - there is some documentation about this on the CHIRP site).
Once setup, plug the cable into the radio and the computer, then turn the radio on.
Start CHIRP, select from the Radio menu - Download from radio. This MUST be done first. Select the COM port for the interface cable. The download will start, and should be done within 30 seconds. If you save the file now, you have a working template you can edit any time without needing to download from the radio first (note this only works for that specific radio!).
Now, you can manually enter the programming information and radio settings. Alternatively, you can export the memory data to a CSV file, and edit it in Excel, or if you have frequency data from another source (for example, the WIA here in Australia provides CHIRP compatible CSV data for Australian repeaters).
If you've created/edited your memory data outside CHIRP, now is the time to import it back. Check that the data appears correctly in CHIRP, manually edit if necessary. Also double check the radio settings - there's a lot of useful options to tweak here. When you're satisfied, save the radio's configuration, so you can make future edits.
When all is ready, make sure the radio is connected properly to the computer and switched on. Select "Upload to Radio" from the Radio menu, then select the correct COM port. The upload should be done within 30 seconds.
Enjoy! :)
Just programmed a UV-5R for a friend, worked a treat, saved a LOT of manually poking buttons. Next project, to come up with a set of common memory data for all of my computer programmable radios, so I can maintain a master spreadsheet and import the data into all of my radios.