done.  what about the cross mode column.  it is set to tone->tone

tone->tone according to the chirp programming reference guide made by kc9hi which is posted to the link that i am including
http://kc9hi.dyndns.org/uv5r/programming/CHIRP%20Guide.pdf

well anyways on page two of this programming guide it has listed for the tone->tone description/comment:  The radio will use CTCSS for transmit and a different CTCSS for receive

that description/comment is what is confusing.  so what should be the setting for the cross mode if i only want a transmit ctcss tone and no receive tone.

Doc N0UKM


On Sat, Feb 16, 2013 at 11:58 PM, Tom Hayward <esarfl@gmail.com> wrote:
On Sat, Feb 16, 2013 at 8:49 PM, Kevin Badger <18dmedic@gmail.com> wrote:
> what i am needing to do is this:  program only a transmit tone and it does
> not matter if it is ctcss or dcs.  the agencies i work with do not require a
> receive tone.  only a transmit tone is needed.

Set the Tone Mode column to Tone.

Tom KD7LXL
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users



--
Doc